Stator plate

Post your Kettle problems here and cures
Filly
Posts: 21
Joined: Wed Nov 02, 2016 3:16 pm

Stator plate

Postby Filly » Thu Aug 16, 2018 5:13 pm

Hello everyone, is someone able to post me photos of the stator plate of the GT 380, GT 550 and GT 750? This is because I have to understand if they differ from each other in the positioning of the left and central right pins. The problem arises from a possible error in the reconstruction of the crankshaft, having my GT 750 the positions of the inverted pins between them. Thank you all. :(

User avatar
Alan H
Posts: 8303
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Stator plate

Postby Alan H » Thu Aug 16, 2018 8:33 pm

What pins are you referring to?
Proof that four strokes are over complicated

Filly
Posts: 21
Joined: Wed Nov 02, 2016 3:16 pm

Re: Stator plate

Postby Filly » Fri Aug 17, 2018 5:48 pm

Unfortunately I do not know English and I have to translate with google, so for pin I wanted to understand the point assy. Sorry for the confusion. Thank you

User avatar
canaletto5
Posts: 3849
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Stator plate

Postby canaletto5 » Fri Aug 17, 2018 7:24 pm

There you go Filly. GT750B points assembly

IMG_3075.JPG


Kev

teazer
Posts: 448
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: Stator plate

Postby teazer » Sun Aug 19, 2018 4:49 pm

I think that Filly had his crank rebuilt and suspects that it may have been assembled with incorrect phasing so that the firing order is now wrong.

750 is Left-Center-Right going anti clockwise.

Filly
Posts: 21
Joined: Wed Nov 02, 2016 3:16 pm

Re: Stator plate

Postby Filly » Tue Aug 21, 2018 5:17 pm

Yes, this is actually how it went. The technician who rebuilt the mast has inverted the flywheels of the shaft by 120 degrees, so now the ignition order is reversed. The bike goes equally well but on the platen plate the openings of the platinum dots are turned. Soon I will put photos of the paitto statore. Greetings to all.

User avatar
canaletto5
Posts: 3849
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Stator plate

Postby canaletto5 » Tue Aug 21, 2018 6:16 pm

Offer to buy him a scribe for the next job :o

User avatar
Alan H
Posts: 8303
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Stator plate

Postby Alan H » Tue Aug 21, 2018 6:43 pm

Disconnect the three wires from points to coils and reconnect them so the correct plug fires - or remove the points plate and rotate it 120ø.
Proof that four strokes are over complicated

User avatar
BAZ
Posts: 3194
Joined: Thu Jun 18, 2009 7:35 pm
Location: Dudley west midlands
Contact:

Re: Stator plate

Postby BAZ » Tue Aug 21, 2018 9:08 pm

Spot on Alan.

User avatar
Scotch750
Posts: 769
Joined: Thu Sep 30, 2010 1:58 pm
Location: Walsall, West Mids.Black Country.

Re: Stator plate

Postby Scotch750 » Tue Aug 21, 2018 10:36 pm

Wuh, ees an engineer u know !! :D


Return to “FAULTS AND CURES”

Who is online

Users browsing this forum: No registered users and 2 guests