Just going through a box of bits that came with the bike and found these washers and screws with no PN's. They were in separate snappy bags and appear to be from GTReiner. Anyone recognise anything?
Which Washers?
-
- Posts: 367
- Joined: Wed Jul 15, 2015 9:13 am
- Location: Birmingham/East Anglia
- Contact:
Which Washers?
Drew. '75 GT750M
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: Which Washers?
They look like they are the washers used for mounting the rear shock absorbers.
The M5 screws might be the screws for joining the switch gear halves together.
The M5 screws might be the screws for joining the switch gear halves together.
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: Which Washers?
Sorry just a closer look and noticed those screws are M6. Not sure what they are for.
-
- Posts: 367
- Joined: Wed Jul 15, 2015 9:13 am
- Location: Birmingham/East Anglia
- Contact:
Re: Which Washers?
That makes sense about the shock mounts as the ones that are on are completely wrong. Thanks.
Drew. '75 GT750M
- yeadon_m
- Posts: 7401
- Joined: Sat Jan 02, 2010 7:10 am
- Location: Canterbury Kent
Re: Which Washers?
Hard to tell! maybe no 1 are washers that sit between the indicator stalk and its mounting on the headlamp brackets?
No 2 are seat trim strip fitting kit parts (incomplete - you need around 15 off).
Agree some of the large washers can be used for shock fitting. I don't think thick washers like that have any other place to be on a GT.
Possibly, the screws are side panel fasteners?
Cheers,
Mike
No 2 are seat trim strip fitting kit parts (incomplete - you need around 15 off).
Agree some of the large washers can be used for shock fitting. I don't think thick washers like that have any other place to be on a GT.
Possibly, the screws are side panel fasteners?
Cheers,
Mike