Starter clutch puller

Post your Kettle problems here and cures
Post Reply
Sketch
Posts: 28
Joined: Sat Oct 08, 2016 2:01 pm

Starter clutch puller

Post by Sketch »

Hi,just to let you know if you need a puller to remove the starter clutch I used a bmw mini cranckshaft pulley remover made by laser tools part number 6142 ,fits perfectly with no modifications,dave
barney01
Posts: 3118
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Starter clutch puller

Post by barney01 »

Can you give more detail? Starter clutch should just come off when you pull it with your hands?
NO SMOKE .......NO POKE
Sketch
Posts: 28
Joined: Sat Oct 08, 2016 2:01 pm

Re: Starter clutch puller

Post by Sketch »

Hi Barney,the starter clutch is fitted on a taper and needed quite a bit of pressure before it popped off,cheers,dave.
User avatar
BAZ
Posts: 3599
Joined: Thu Jun 18, 2009 7:35 pm
Location: Dudley west midlands
Contact:

Re: Starter clutch puller

Post by BAZ »

Just a tip put a rag over it or it may fly across the workshop and you will lose the bits!
Sketch
Posts: 28
Joined: Sat Oct 08, 2016 2:01 pm

Re: Starter clutch puller

Post by Sketch »

Good tip baz,rollers and springs could fly everywhere!
barney01
Posts: 3118
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Starter clutch puller

Post by barney01 »

Thanks we have different types of starter clutches.
NO SMOKE .......NO POKE
teazer
Posts: 1035
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: Starter clutch puller

Post by teazer »

I use a steering wheel puller from any auto store.

http://pinkpossum.com/GT750/Crank%20pullers.htm
User avatar
BATTS
Posts: 441
Joined: Sun Jul 15, 2012 6:47 pm
Location: Lancashire

Re: Starter clutch puller

Post by BATTS »

teazer wrote:I use a steering wheel puller from any auto store.

http://pinkpossum.com/GT750/Crank%20pullers.htm
I use a harmonic balance puller which is a crankshaft pulley puller, but you can get them a bit cheaper than a BMW tool I suspect.

https://www.machinemart.co.uk/p/cht248- ... ce-puller/
Chris
76 GT750, 78 GT550, BMW K1600gtl
Post Reply