Rebore necessary. What pistons?

Post your Kettle problems here and cures
Janv750
Posts: 10
Joined: Sat Oct 14, 2017 5:12 pm
Location: South Africa

Re: Rebore necessary. What pistons?

Post by Janv750 »

I got hold of Wiseco's 71.5mm pistons in South Africa where I am based and had the cylinders rebored. The LH sleeve seems very thin towards the inlet side as per the attached photo. Please advise if it can be run like this.
Attachments
1.5mm
1.5mm
User avatar
BAZ
Posts: 3599
Joined: Thu Jun 18, 2009 7:35 pm
Location: Dudley west midlands
Contact:

Re: Rebore necessary. What pistons?

Post by BAZ »

It's not thin it's just the Barell alloy hiding the sleeve. you will see the thickness at the bottom..
Janv750
Posts: 10
Joined: Sat Oct 14, 2017 5:12 pm
Location: South Africa

Re: Rebore necessary. What pistons?

Post by Janv750 »

Thank you
Post Reply