750K Badge infill

User avatar
Dazel
Posts: 85
Joined: Thu Feb 20, 2014 6:28 pm
Location: Sheffield

750K Badge infill

Postby Dazel » Sun Jan 13, 2019 2:45 pm

Hi Guys. I have hardly used my ‘K’ for the last couple of years. Cannot blame the weather as we all know how good last year was. However, with retirement looming in the next couple of years, I am keeping it in good order (currently hibernating in a Vac-bag) ready for use at my leisure. I currently have the tank off and have added a set of ‘A’ decals, as did not feel standard decals would suit the non-standard red paintwork. The ‘A’ decals did not fit the full distance along the bottom of the tank, so cut them short inline with the tank badge (Photo 1). I think it looks ok, but definitely an improvement over when there were no decals (Photo 2).
To tidy the tank up even more, I may need to reluctantly replace the near new badges, as both have lost some of the red infill as can be seen in the attached. This has vibrated out when running the bike. When you buy the badges, they come straight so you need to manipulate them to fit the tank curvature. This must locally break the infill bond, so guess I should have lacquered them before fixing.
As I know the badges will be well and truly fixed and I do not wish to run the risk of damaging the paintwork, does anyone know if there is a touch-up paint that matches the infill colour ?

Cheers Dazel.
Tank 1.jpg
Tank 2.jpg

User avatar
canaletto5
Posts: 4277
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: 750K Badge infill

Postby canaletto5 » Sun Jan 13, 2019 2:58 pm

Hi

Tamiya clear red X-27 is the stuff. Goes on well if you use a soft model hobby brush

off ebay or Amazon

Kev

User avatar
itsnotateapot
Posts: 882
Joined: Thu Feb 16, 2012 10:09 pm
Location: Sheffield, South Yorkshire

Re: 750K Badge infill

Postby itsnotateapot » Sun Jan 13, 2019 4:32 pm

Hi Dave
I Have some, give us a Bell.
Richard
SUZUKI GT750 L 8-)
SUZUKI T500 M 8-)
SUZUKI GT185 K 8-)

User avatar
Dazel
Posts: 85
Joined: Thu Feb 20, 2014 6:28 pm
Location: Sheffield

Re: 750K Badge infill

Postby Dazel » Mon Jan 14, 2019 5:19 pm

Thanks for the info Guys.
Will phone later Rich.
Cheers :D

User avatar
Dazel
Posts: 85
Joined: Thu Feb 20, 2014 6:28 pm
Location: Sheffield

Re: 750K Badge infill

Postby Dazel » Sun Mar 10, 2019 11:07 pm

Tank infil paint now sorted. Cheers.
Attachments
Tank 3.jpg
Tank 4.jpg

User avatar
malky
Posts: 904
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: 750K Badge infill

Postby malky » Mon Mar 11, 2019 12:45 am

What did you use in the end ? They look great

User avatar
Dazel
Posts: 85
Joined: Thu Feb 20, 2014 6:28 pm
Location: Sheffield

Re: 750K Badge infill

Postby Dazel » Wed Mar 13, 2019 5:56 pm

I used the recommended Tamiya clear red X-27. Just gradually built up the thickness as advised. Was about three quid on Ebay.
Cheers.

User avatar
malky
Posts: 904
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: 750K Badge infill

Postby malky » Thu Mar 14, 2019 12:33 am

Cheers - just ordered some
Mal.

User avatar
rodent
Posts: 93
Joined: Sat Feb 17, 2018 10:22 pm

Re: 750K Badge infill

Postby rodent » Sun Mar 17, 2019 4:41 am

What about the paint colour for the side cover badges? What colour are you guys using?

barney01
Posts: 2405
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: 750K Badge infill

Postby barney01 » Sun Mar 17, 2019 7:28 am

This is a perfect match and I've used it a couple of times
https://www.ebay.co.uk/itm/MARABU-GLASA ... 4844860da4
NO SMOKE .......NO POKE


Return to “REFRENCE PICTURES OF RESTORED BIKES AND TECH BULLETINS”

Who is online

Users browsing this forum: No registered users and 1 guest