Page 1 of 1

delkevic exhaust quility issues

Posted: Fri Jul 12, 2019 8:48 pm
by linsteve1
Hi all has any fellow member bought a set of exhaust from Delkevic I have had 2 sets now the first was a set of B grades which I sent back because the baffle plate welds were easily seen the second set were a A grade set which were as bad as the B grade set http://www.kettlechttp://www.kettleclin ... w&id=24546

Re: delkevic exhaust quility issues

Posted: Sat Jul 13, 2019 12:54 am
by Roger Ackery
That's not good :?
Bought a set for mine second hand years ago,
Not show quality, but I'm happy with how they look, the sound is definitely different than OEM.

Re: delkevic exhaust quility issues

Posted: Sat Jul 13, 2019 9:16 am
by stevewharton
Baz is the expert on Delkevics, remember him saying that the second generation sets are much improved on sound and quality, perhaps they've fobbed you off with another lower quality set, I'd be on their case pronto :x

Re: delkevic exhaust quility issues

Posted: Sat Jul 13, 2019 5:40 pm
by johnakay
they must have monkeys tig welding that lot.

Re: delkevic exhaust quility issues

Posted: Sun Jul 14, 2019 10:18 pm
by gladders
Does not A or B grade suggest below standard, I have bought electrical goods on this basis and generally A or B have marks, defects, parts missing excetera

Re: delkevic exhaust quility issues

Posted: Mon Jul 15, 2019 8:07 pm
by linsteve1
The A grades sets should be perfect its the ones they sell for £1449.99

Re: delkevic exhaust quility issues

Posted: Wed Jul 17, 2019 2:05 pm
by Dutch
I bought a full set of B grade off them after they said they were near perfect and thought I had landed a bargain at £800. When they arrived the quality was shocking, ful of speckles and weld marks like yours. I phoned him up and told the guy what I thought and took them back personally to show him. He showed me a set of A grade and they were the same, so I got a refund :o

Re: delkevic exhaust quility issues

Posted: Wed Jul 17, 2019 3:28 pm
by 2strokejohnny
i got a grade B set and there are 2 little marks one on either side of the outer pipes but on the inner side of the pipes so i am happy with mine

Re: delkevic exhaust quility issues

Posted: Wed Jul 17, 2019 5:51 pm
by linsteve1
Thank you all for your replies I will be in touch with Paul at Delkevic tomorrow to send them back and get a refund