Evening everybody, hope all is well, just looking at floats from c image , has any body used them & are they any good
on ebay , £25.00 + post. Thanks.
cruzin image 750 floats
- PaulD738
- Posts: 3963
- Joined: Thu Sep 25, 2014 6:57 pm
- Location: Warrington Cheshire
Re: cruzin image 750 floats
Used them in my 750J and also in my T500. Just as good as Mikuni at a bargain price
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
-
- Posts: 28
- Joined: Wed Oct 26, 2011 6:21 pm
- Location: Stowmarket,
Re: cruzin image 750 floats
Excellent, thanks very much , my mate has just brought a L, stripped the carbs only to find 2 out of the 3
had solder all over them.
had solder all over them.
-
- Posts: 3693
- Joined: Wed Jul 20, 2011 3:40 am
- Location: Sydney NSW Australia
Re: cruzin image 750 floats
I found a dent in one of my floats was causing a flooding problem, replaced the float & all was well again.
Cheers.
Roger
GT750A.
Roger
GT750A.
-
- Posts: 28
- Joined: Wed Oct 26, 2011 6:21 pm
- Location: Stowmarket,
Re: cruzin image 750 floats
Evening all, put the carbs in the cleaner today, removed & laid out, noticed where the air screw goes 1 of the wot looks like
a little brass ball bearing /plug is missing, where these pressed in, or put in using heat, & is the body now u/s. or can you just blank it off.
Thanks.
a little brass ball bearing /plug is missing, where these pressed in, or put in using heat, & is the body now u/s. or can you just blank it off.
Thanks.
- yeadon_m
- Posts: 7401
- Joined: Sat Jan 02, 2010 7:10 am
- Location: Canterbury Kent
Re: cruzin image 750 floats
I’d just blank it off but how did the little bugger get loose in the first place?
Cheers,
Mike
Cheers,
Mike