Washer from starter Motor cover area- need some help

Post Reply
User avatar
EvansWard
Posts: 81
Joined: Sat Apr 22, 2017 1:11 am
Location: Macon GA USA

Washer from starter Motor cover area- need some help

Post by EvansWard »

Greetings all! Need some help to determine where the larger washer in the pic goes? Fell out upon removal of starter cover on GT750A. If needed, can measure washer in question. For reference, that's the water pump gear washer and E clip retainer too in pic. The major malfunction did happen while riding. :( Thanks in advance!
IMG_6646.JPG
IMG_6645.JPG
Last edited by EvansWard on Mon Aug 13, 2018 2:57 pm, edited 1 time in total.
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
User avatar
EvansWard
Posts: 81
Joined: Sat Apr 22, 2017 1:11 am
Location: Macon GA USA

Re: Washer from starter Motor cover area- need some help

Post by EvansWard »

IMG_6684.JPG
IMG_6683.JPG
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
summer0123
Posts: 52
Joined: Tue Nov 17, 2015 2:58 pm
Location: Neath, South Wales

Re: Washer from starter Motor cover area- need some help

Post by summer0123 »

Fit the drive pin and the plastic water pump idler gear and then the thrust washer and the E clip.
Also make sure the starter motor double idler gear which is just above the plastic gear has a thrust washer on both sides of the gear.
paul
User avatar
EvansWard
Posts: 81
Joined: Sat Apr 22, 2017 1:11 am
Location: Macon GA USA

Re: Washer from starter Motor cover area- need some help

Post by EvansWard »

That's it! Fits on the double starter idler gear shaft- thank you! :D
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
Post Reply