Washer from starter Motor cover area- need some help
- EvansWard
- Posts: 81
- Joined: Sat Apr 22, 2017 1:11 am
- Location: Macon GA USA
Washer from starter Motor cover area- need some help
Greetings all! Need some help to determine where the larger washer in the pic goes? Fell out upon removal of starter cover on GT750A. If needed, can measure washer in question. For reference, that's the water pump gear washer and E clip retainer too in pic. The major malfunction did happen while riding. Thanks in advance!
Last edited by EvansWard on Mon Aug 13, 2018 2:57 pm, edited 1 time in total.
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
- EvansWard
- Posts: 81
- Joined: Sat Apr 22, 2017 1:11 am
- Location: Macon GA USA
Re: Washer from starter Motor cover area- need some help
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
-
- Posts: 52
- Joined: Tue Nov 17, 2015 2:58 pm
- Location: Neath, South Wales
Re: Washer from starter Motor cover area- need some help
Fit the drive pin and the plastic water pump idler gear and then the thrust washer and the E clip.
Also make sure the starter motor double idler gear which is just above the plastic gear has a thrust washer on both sides of the gear.
paul
Also make sure the starter motor double idler gear which is just above the plastic gear has a thrust washer on both sides of the gear.
paul
- EvansWard
- Posts: 81
- Joined: Sat Apr 22, 2017 1:11 am
- Location: Macon GA USA
Re: Washer from starter Motor cover area- need some help
That's it! Fits on the double starter idler gear shaft- thank you!
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350