1970 Suzuki T250-II Horn
- Syd
- Posts: 311
- Joined: Tue Aug 16, 2011 11:25 pm
1970 Suzuki T250-II Horn
Hello, would anyone know if there is an exploded drwg, some photos showing all of the internal parts or a link for a 1970 T250-II horn, see the attached photo. I have just refurbished my horn and I have an internal washer that I cannot find a home for. My fault for note taking enough photos. Any help would be much appreciated.
-
- Posts: 3693
- Joined: Wed Jul 20, 2011 3:40 am
- Location: Sydney NSW Australia
Re: 1970 Suzuki T250-II Horn
Hi Syd,I cant find anything about the internals,but there are 3 washers on the centre shaft, 2 normal, 1 locking washer (spring type)then the nut
Cheers.
Roger
GT750A.
Roger
GT750A.
- Syd
- Posts: 311
- Joined: Tue Aug 16, 2011 11:25 pm
Re: 1970 Suzuki T250-II Horn
Hi Roger,
This is the mystery washer - see the attached pic. It make sense to fit this over the flanged piston but when fitted it then stops the centre piston plate flexing to allow the piston to move down into the coil when activated as there is no room?
This is the mystery washer - see the attached pic. It make sense to fit this over the flanged piston but when fitted it then stops the centre piston plate flexing to allow the piston to move down into the coil when activated as there is no room?
- Syd
- Posts: 311
- Joined: Tue Aug 16, 2011 11:25 pm
Re: 1970 Suzuki T250-II Horn
All sorted now, I found the correct location for the washer