1970 Suzuki T250-II Horn

Post Reply
User avatar
Syd
Posts: 311
Joined: Tue Aug 16, 2011 11:25 pm

1970 Suzuki T250-II Horn

Post by Syd »

Hello, would anyone know if there is an exploded drwg, some photos showing all of the internal parts or a link for a 1970 T250-II horn, see the attached photo. I have just refurbished my horn and I have an internal washer that I cannot find a home for. My fault for note taking enough photos. Any help would be much appreciated.
Attachments
T250 Horn.JPG
Roger Ackery
Posts: 3693
Joined: Wed Jul 20, 2011 3:40 am
Location: Sydney NSW Australia

Re: 1970 Suzuki T250-II Horn

Post by Roger Ackery »

Hi Syd,I cant find anything about the internals,but there are 3 washers on the centre shaft, 2 normal, 1 locking washer (spring type)then the nut ;)
Cheers.
Roger
GT750A.
User avatar
Syd
Posts: 311
Joined: Tue Aug 16, 2011 11:25 pm

Re: 1970 Suzuki T250-II Horn

Post by Syd »

Hi Roger,

This is the mystery washer - see the attached pic. It make sense to fit this over the flanged piston but when fitted it then stops the centre piston plate flexing to allow the piston to move down into the coil when activated as there is no room?
Attachments
IMG_0342.jpg
User avatar
Syd
Posts: 311
Joined: Tue Aug 16, 2011 11:25 pm

Re: 1970 Suzuki T250-II Horn

Post by Syd »

All sorted now, I found the correct location for the washer
Post Reply