J model leaking float bowls

User avatar
Rijko

Re: J model leaking float bowls

Post by Rijko »

999homer wrote:So float height for a J is what , is it measured with or without a gasket should it be tilted ??????

Help please
the search option on this forum works well :-)

edit : removed link
Last edited by Rijko on Thu May 18, 2017 10:23 pm, edited 2 times in total.
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: J model leaking float bowls

Post by Alan H »

Or a page from an early Suzuki service manual
Suzuki service manual 1972 P7.JPG
Proof that four strokes are over complicated
User avatar
Rijko

Re: J model leaking float bowls

Post by Rijko »

that's better than what i posted, removed the link from my previous post
User avatar
BAZ
Posts: 3599
Joined: Thu Jun 18, 2009 7:35 pm
Location: Dudley west midlands
Contact:

Re: J model leaking float bowls

Post by BAZ »

Float height is 27mm set with gasket fitted and the float needle must be sprung up it the spring is weak you may need to tilt the carb. with new float valve, you won't have to tilt as the spring is stronger
Post Reply