GT380M outer right exhaust.

Post your problems / information on the smaller GT Models here
Post Reply
willowden
Posts: 167
Joined: Thu Nov 16, 2017 3:10 pm

GT380M outer right exhaust.

Post by willowden »

Hi Guys,
I need an outer right exhaust for my GT380M 1975.
I am fairly new to the bike & I picked up a bundle of exhausts. Unfortunately the replacement I thought I had doesn’t fit.
I assume it must be off an earlier model ? The bracket location is different. From the end of the exhaust the first bracket nut is 35cm. On the replacement it’s 38cm.
Has anyone got a replacement they would be happy to swop or sell. Mine is cracked at the top of the neck.
Many thanks Andy
Attachments
2F1086FE-69C7-4570-8A21-19DB16B70C33.jpeg
9A99F186-49EB-4ECB-8E48-144C1F7EF2F8.jpeg
teazer
Posts: 1035
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: GT380M outer right exhaust.

Post by teazer »

Is there enough meat in the bracket to slot it and move it enough to work? If not can you modify the bracket to allow it to move to the right spot? Might be easier than finding a correct pipe in good shape.

It may also be possible to fabricate a new bracket
User avatar
Gary66
Posts: 710
Joined: Sun Jan 05, 2014 10:53 am

Re: GT380M outer right exhaust.

Post by Gary66 »

I will take a.look as.i.think I have a 380 pipe, not sure which side etc
User avatar
Gary66
Posts: 710
Joined: Sun Jan 05, 2014 10:53 am

Re: GT380M outer right exhaust.

Post by Gary66 »

Just dug out the pipe i have, its a left outer as you sit on the bike, it measure 380mm to the centre stud where the bracket will fit, i assume this is no good to you :?:
willowden
Posts: 167
Joined: Thu Nov 16, 2017 3:10 pm

Re: GT380M outer right exhaust.

Post by willowden »

Thanks Gary , no good mate I am afraid.
I will see if Ican get mine welded or make a bracket for the early one I have,
Cheers
Post Reply