Exhaust frame mounting insert extraction

[wents75]

Yo whats the best way to get these buggers out!
Ta

[martyducati]

Hacksaw!,collapse the centre bush,dig the rotten rubber out(it's amazing how strong" rotten " rubber is) then weaken the outer bush with hacksaw and chisel the bush out,time consuming boring job,

[Alan H]

2 sockets and a long bolt.

[Roger Ackery]

Hi,I've tried both methods.....hacksaw very effective,just make sure you don't nick the frame with the hacksaw blade

Cheers,
Roger

[wents75]

Thanks guys
Use the sockets as a puller with the bolt and nuts yes?

[Alan H]

Yup. One socket each side and it'll push tbe bush out of the frame and into the other socket.

[wents75]

Sweet
Ta

[teazer]

Last set I had to remove had bonded with a nice seal of rust so they had to be sawn out. New ones greased up pulled in with allthread and a couple of sockets.