Could do with a bit of help please. To the rear of my carburettor bank in the middle are two plastic unions that I presume are some kind of breathers. I am unsure of where I should connect a tube to or from ?
Thanks, Andy
GT380M carburettor breathers ?
-
- Posts: 262
- Joined: Wed Nov 25, 2015 8:25 pm
- Location: Colchester Essex UK
Re: GT380M carburettor breathers ?
Any pics?
Do you mean the plastic T pieces .
The branches of these Ts are connected to 6mm breather hoses.
Do you mean the plastic T pieces .
The branches of these Ts are connected to 6mm breather hoses.
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: GT380M carburettor breathers ?
Have a look here it may help you http://www.3cyl.com/tripleed/suzigtcarb/32.jpg
And here is the whole manual http://www.3cyl.com/mraxl/gt/manuals/su ... /cover.htm
And here is the whole manual http://www.3cyl.com/mraxl/gt/manuals/su ... /cover.htm
NO SMOKE .......NO POKE
-
- Posts: 167
- Joined: Thu Nov 16, 2017 3:10 pm
Re: GT380M carburettor breathers ?
Thanks guys, I do mean the plastic T pieces , when attaching the hose , where does it locate to then ?
Thanks
Thanks
-
- Posts: 262
- Joined: Wed Nov 25, 2015 8:25 pm
- Location: Colchester Essex UK
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: GT380M carburettor breathers ?
How about this picture?
A goes to the petcock
B just vents to the atmosphere.
A goes to the petcock
B just vents to the atmosphere.
Last edited by barney01 on Wed Feb 14, 2018 8:29 pm, edited 1 time in total.
NO SMOKE .......NO POKE
- Alan H
- Posts: 12104
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: GT380M carburettor breathers ?
Those slides need setting up!wents75 wrote:
Proof that four strokes are over complicated
-
- Posts: 167
- Joined: Thu Nov 16, 2017 3:10 pm
Re: GT380M carburettor breathers ?
Excellent , thanks it was b that I queried , cheers
-
- Posts: 262
- Joined: Wed Nov 25, 2015 8:25 pm
- Location: Colchester Essex UK
Re: GT380M carburettor breathers ?
Ha ha
Yes Thanks Alan, Iv just been reading that Carb Set up link. Seems a little clearer now!
that pic was before I striped them down. I'am hoping to find some local 2 stroke triple guru to learn me!
Yes Thanks Alan, Iv just been reading that Carb Set up link. Seems a little clearer now!
that pic was before I striped them down. I'am hoping to find some local 2 stroke triple guru to learn me!
- yeadon_m
- Posts: 7401
- Joined: Sat Jan 02, 2010 7:10 am
- Location: Canterbury Kent
Re: GT380M carburettor breathers ?
The hoses from the T-pieces face rearwards and sit under the airfilter, vented to air.
Cheers,
Mike
Cheers,
Mike