I've Recently got a Gt380 J model.
There is no light coming on when in neutral I've changed the bulb still nothing..My mechanical kownledge is limited but is it worth buying a new neutral switch as maybe the problem as the bike is from 1972..Also is it easy to fit as any advice would help.
Thanks.
I'm new to forums
Gt380J Neutral Switch
-
- Posts: 262
- Joined: Wed Nov 25, 2015 8:25 pm
- Location: Colchester Essex UK
Re: Gt380J Neutral Switch
Hi Remich
Well your in the right place.
A little intro can often go a long way with the guru's on here ( thats not me!)
However fairly simple removing the left hand clutch linkage cover then the cable . Gear foot levar has to be removed. Then remove the inner final drive cover which comes away with the clutchrod pusher in place .
Your neutral switch is in there.
Best get a Haynes manual for reference at least.
Nice ride!
Ta
Ian
Well your in the right place.
A little intro can often go a long way with the guru's on here ( thats not me!)
However fairly simple removing the left hand clutch linkage cover then the cable . Gear foot levar has to be removed. Then remove the inner final drive cover which comes away with the clutchrod pusher in place .
Your neutral switch is in there.
Best get a Haynes manual for reference at least.
Nice ride!
Ta
Ian
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Gt380J Neutral Switch
Hello Remich. We like to know who you are and a few details before you start to ask stuff.
Where you are based and a few details of your bikes ( and pics of them) are good starter points.
Other than that, welcome to the asylum.
Where you are based and a few details of your bikes ( and pics of them) are good starter points.
Other than that, welcome to the asylum.
Proof that four strokes are over complicated