Hi all... I have to remove the clutch cover on my GT380 to reset the timing nylon sprocket. Question is do I use any sealer with the gasket?
I read a thread that said a smear of grease but not ever done this before....
Thanks
Dave B
Clutch cover gasket...
-
- Posts: 80
- Joined: Tue May 22, 2018 8:37 pm
- Location: Portsmouth UK
-
- Posts: 1244
- Joined: Tue Jul 13, 2010 5:36 pm
- Location: north lincolnshire
Re: Clutch cover gasket...
I just use a thin smear of grease, but only really to keep it in place whilst I replace the cover. You can usually use the same gasket for a good while before it needs replacing I find.
Andy;
1976 gt750A; 86 FZ750
1977gt380A
1982 z400j
1981 z650f.....1988 Sufolk punch 14"
"look;it's my bike; when you own it ,you can paint it any colour you like!"
(I once painted my Z650 PINK and had the pink panther logo on the tailpiece)
1976 gt750A; 86 FZ750
1977gt380A
1982 z400j
1981 z650f.....1988 Sufolk punch 14"
"look;it's my bike; when you own it ,you can paint it any colour you like!"
(I once painted my Z650 PINK and had the pink panther logo on the tailpiece)
-
- Posts: 80
- Joined: Tue May 22, 2018 8:37 pm
- Location: Portsmouth UK
Re: Clutch cover gasket...
Thanks for the reply..
Dave Bailey
Dave Bailey