Accelerator cables

Post your problems / information on the smaller GT Models here
Post Reply
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Accelerator cables

Post by salvatore »

Sorry, I have to ask for two tips.
The right position of the accelerator cables as to fit the right side of the knob on the carburettor and the inner tube to the handlebar, some photos help me.
I bought a new cruzinimage piston kit, increased by 1 mm, as a right tolerance for the cylinder and piston rod, in the manual it is not clear to me.
I must confide that when I took the bike apart, I took a lot of photos, but my granddaughter used my cell phone and some photos were lost, I apologize to everyone if I ask for much help, thank you very much.
barney01
Posts: 3118
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Accelerator cables

Post by barney01 »

NO SMOKE .......NO POKE
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Accelerator cables

Post by salvatore »

thanks the photo helps me a lot, but I have the problem of how to insert the cables under and inside the throttle knob, such as the first and which the second, if first double wire for gas and oil pump or the other, I'm sorry but I lost the photos of the disassembly. I wish you a happy new year. Best wishes
barney01
Posts: 3118
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Accelerator cables

Post by barney01 »

The front hole has cable number 1 which has the oil cable as well. The back hole is for cable number 2 which has only the one cable.
Happy new year to you! :D
NO SMOKE .......NO POKE
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Accelerator cables

Post by salvatore »

perfect now everything is clear
Post Reply