Screw mrmegapack

Post your problems / information on the smaller GT Models here
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Screw mrmegapack

Post by salvatore »

hi, I bought from mr megapack.co.uk the screws for the cylinders and the engine head, in the insertion says that they are specific to Suzuki gt 380, the diameter is right 10 x 1.25 but the outside is not for key 14 mm is 17 mm. Has anyone in the forum bought the same kit? what measures he has received. I threw away a lot of money, I do not know what to do
Attachments
IMG_20190107_165246.jpg
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Screw mrmegapack

Post by canaletto5 »

You must buy the nuts that have the reduced head sizes to match the original Japanese standard

Look here

https://www.stainlessautomotivefastenin ... ht3gok66c7
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Screw mrmegapack

Post by Alan H »

Write and tell he so that he can sort it out at HIS expense.
Proof that four strokes are over complicated
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Screw mrmegapack

Post by salvatore »

Hello channel 5, thank you for the news, I visited the site every nut costs 4.15 pounds, too much for how many nut they need, now I wrote mr megapack, I hope he understands his mistake.
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Screw mrmegapack

Post by salvatore »

SUZUKI GT380 GT550 STAINLESS STEEL CYLINDER BARREL NUT SETS 08310-00107
( 162456663902 )
suzukigtfasteners5695
s-l200.jpg
s-l200.jpg (7.96 KiB) Viewed 288 times


Good morning, I found this kit for cylinders on ebay, but the seller does not ship to Italy, I ask you if I send to one of you the total cost of the purchase with the cost also for shipping to Italy, you would be willing to do this for me? I can pay with paypal, or through your bank. So you buy the article for me to send it to your address and then you send it to me. Thank you
User avatar
mizzytheman
Posts: 2227
Joined: Tue Dec 28, 2010 1:17 pm
Location: Knowsley, Liverpool

Re: Screw mrmegapack

Post by mizzytheman »

Hi,

Mark read (who supplies those kits) is a member on here and if you send him a message he may ship directly to Italy.

Regards

Martin.
barney01
Posts: 3118
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Screw mrmegapack

Post by barney01 »

Hi Salvador
I have sent a private message to the seller to ask if he will post to you. If he doesn't I will help you. :D
NO SMOKE .......NO POKE
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Screw mrmegapack

Post by canaletto5 »

salvatore wrote:Hello channel 5, thank you for the news, I visited the site every nut costs 4.15 pounds, too much for how many nut they need, now I wrote mr megapack, I hope he understands his mistake.
Hi. I was showing the kind of nuts that you should have. Your supplier should put the problem right.
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Screw mrmegapack

Post by salvatore »

Thank you You are some wonderful friends I wait for your news on how to behave Thanks
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Screw mrmegapack

Post by salvatore »

My thanks and for all of you Sometimes my translator speaks only in the singular Thank you
Post Reply