Evening all, thought I was making some progress but reassembled the master cylinder with a rebuild kit a few weeks ago - tried to fit and bleed brakes last weekend. Anyway the brake lever seems to move in freely enough but when it is released it pops out a bit , but then seems to stick a little before fully releasing. Apologies for the poor description but it does n't seem right to me. Any ideas ??
Cheers Eamonn
Master Cylinder Fault
-
- Posts: 157
- Joined: Wed Feb 06, 2019 2:43 pm
- Location: West oxfordshie
- Contact:
Re: Master Cylinder Fault
Evening young fellow, I see according to the posts, nobodies reply as yet.
Strange I thought some would by now.(I only joined Wednesday).
So by now I take it you've got it fixed, if not mail me and I'll got through the system with you.
Check my various post to know more about me.
Strange I thought some would by now.(I only joined Wednesday).
So by now I take it you've got it fixed, if not mail me and I'll got through the system with you.
Check my various post to know more about me.
On fragrant cloud