Master Cylinder Fault

Post your problems / information on the smaller GT Models here
Post Reply
User avatar
es2GT550

Master Cylinder Fault

Post by es2GT550 »

Evening all, thought I was making some progress but reassembled the master cylinder with a rebuild kit a few weeks ago - tried to fit and bleed brakes last weekend. Anyway the brake lever seems to move in freely enough but when it is released it pops out a bit , but then seems to stick a little before fully releasing. Apologies for the poor description but it does n't seem right to me. Any ideas ??
Cheers Eamonn
lairdofsmoke
Posts: 157
Joined: Wed Feb 06, 2019 2:43 pm
Location: West oxfordshie
Contact:

Re: Master Cylinder Fault

Post by lairdofsmoke »

Evening young fellow, I see according to the posts, nobodies reply as yet.
Strange I thought some would by now.(I only joined Wednesday).
So by now I take it you've got it fixed, if not mail me and I'll got through the system with you.
Check my various post to know more about me.
On fragrant cloud
User avatar
es2GT550

Re: Master Cylinder Fault

Post by es2GT550 »

many thanks PM sent
Post Reply