Still problem

Post your problems / information on the smaller GT Models here
Post Reply
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Still problem

Post by salvatore »

still a problem, the system does not charge the battery, I dismantled the regulator seems to be ok, but with the engine running at 2000 rpm, the tips inside the regulator do not move, is it normal? what should I check, maybe even a photo. thank you
barney01
Posts: 3120
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Still problem

Post by barney01 »

I think the first thing I would do is check all the connections from the alternator. Make sure they are clean especially all of the earth wires When the engine runs, connect a multimeter across the terminals of the battery. What is the voltage reading?
NO SMOKE .......NO POKE
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Still problem

Post by salvatore »

as you can see in the picture this brush is damaged can affect the battery recharging, where I can buy the new replacement.
IMG_20190324_181845.jpg
IMG_20190324_181924.jpg
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Still problem

Post by canaletto5 »

Is model Denso or Kokusan?

Denso list here

https://www.robinsonsfoundry.co.uk/shop ... natordenso
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Still problem

Post by canaletto5 »

barney01
Posts: 3120
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Still problem

Post by barney01 »

NO SMOKE .......NO POKE
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Still problem

Post by salvatore »

Hi, the rupture of this Brush may not charge the battery, I have this problem without charging my electrical system
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Still problem

Post by canaletto5 »

Yes, a broken brush will not charge the battery
salvatore
Posts: 110
Joined: Fri Nov 09, 2018 1:28 am

Re: Still problem

Post by salvatore »

I am happy with your answer, I hope you solve this problem.
Post Reply