So still chasing my vibration and my lack of top end performance... so I finally this evening decided to tackle the challenge of removing the exhaust baffles. To my amazement all of the bolts came out and the baffles slid straight out. Not blocked at all but there isn’t any wadding wrapped around them... Is this normal? I seem to remember that performance was dependant on the exhausts offering some back pressure...
Thanks
Dave Bailey
Exhaust baffles.... gt380..
-
- Posts: 80
- Joined: Tue May 22, 2018 8:37 pm
- Location: Portsmouth UK
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Exhaust baffles.... gt380..
Two schools of thought as ever on here ! Just about everyone seems not to bother with the wadding. None of mine have it including my 380 and it runs just fine, Kev
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Exhaust baffles.... gt380..
AFAIK the wadding was just added by Suzuki to appease emission laws at the time. One thing I do know is, if fitted, it quite quickly becomes matted and oily and will choke the engine. Some people like the muffled sound so you can still buy it from Yambits if you want to.
NO SMOKE .......NO POKE
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Exhaust baffles.... gt380..
Have you thought about balancing the carbs? If they are not sync'd that could cause the symptoms you describe.
NO SMOKE .......NO POKE
-
- Posts: 80
- Joined: Tue May 22, 2018 8:37 pm
- Location: Portsmouth UK
Re: Exhaust baffles.... gt380..
Hmmm ok good shout and thanks... I have a single cable version so will need to look into how it’s done...
Thanks for th3 suggestion...
Dave Bailey
Thanks for th3 suggestion...
Dave Bailey
-
- Posts: 80
- Joined: Tue May 22, 2018 8:37 pm
- Location: Portsmouth UK
Re: Exhaust baffles.... gt380..
Are there any vacuum ports on the gt380 carbs to connect a manometer to?
Thanks
Dave Bailey
Thanks
Dave Bailey
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Exhaust baffles.... gt380..
There are no ports to connect the manometer to, and the general feeling is that they dont function too well on these carbs. IMHO the best way to balance the carbs is to use an airflow meter. You can of course use the manual method.
Here is an airflow meter in use on a 550 seperate carb but the principal is the same
https://youtu.be/9G5Hsenlv1g
Just in case you don't have it
http://www.3cyl.com/mraxl/gt/manuals/su ... /cover.htm
Here is an airflow meter in use on a 550 seperate carb but the principal is the same
https://youtu.be/9G5Hsenlv1g
Just in case you don't have it
http://www.3cyl.com/mraxl/gt/manuals/su ... /cover.htm
NO SMOKE .......NO POKE
-
- Posts: 80
- Joined: Tue May 22, 2018 8:37 pm
- Location: Portsmouth UK
Re: Exhaust baffles.... gt380..
Ok... sorted... I have ordered the tools so hopefully I may be able to check the balance over the weekend..
Once again thanks for the advice....
Dave Bailey
Once again thanks for the advice....
Dave Bailey