Height of spacer for GT550 rear plastic mudguard.

[Gr8uncleal]

Does anyone know the height of the spacers that sit inside the top of the plastic rear inner mudguard? The ones off my GT550J are missing (which probably explains the cracks in the mudguard), but I have acquired a pair in amongst a load of other spares. They are 4.6mm high and, if I was being really picky, might say they were a tad taller than the thickness of the plastic mudguard. However, that might have been Suzuki's intention.

The part number is 09180-07007, superseding to 09180-06041.

Any help on this, and also my parts id questions, would be really appreciated.

Thanks.

Alan

[Alan H]

https://www.partzilla.com/product/suzuki/09180-07007

7.6x10x5 according to partzilla

[Gr8uncleal]

Thanks Alan H.

I looked at Partzilla under 1972 GT550 and it gave the new number, but with no measurements.

Alan B

[Alan H]

You're only a 'B'. I'm a 'H'. Much more experienced. Just wait til I get to X!

[Gr8uncleal]

Can't argue with that!

[Peter]

Making good use of the search function and found this thread.I’m putting the rear mudguard back on my 380 and wondering does the spacer go between the frame and the black guard or between the black guard and chrome guard?

[Alan H]

Look here - https://alpha-sports.com/suzuki_parts.htm - year, gt550, fender.
Can't remember the sequence, and I'm not at home to check!