Ok as promised here goes:
750J genuine non lockable fuel filler cap £50 (SOLD)
Condensers, set of 3 used but good £15 (SOLD)
Condenser set of 2? New £15 (SOLD)
Rear tank rubber new £10
Full set engine mounts new £40 (SOLD)
Fork top nuts used £10 (SOLD)
Air filter used but good £10 (SOLD)
Rear light used £10 (SOLD)
750 J horn very rare needs chrome £40
750-550J twin pull brake lever broken blade £10 (SOLD)
750-550J twin pull brake lever used £20 (SOLD)
750-550 clutch & choke lever used £20 (SOLD)
Clymer GT750 manual as new £20
Genuine Suzuki workshop manual rare, dirty but all pages there. Invaluable for Kettle owner £30 (SOLD)
GT750J owners handbook, a very good copy from Marcel, Brand new and unused £30 (SOLD)
Points rotor with cam £15 (SOLD)
Thermostat used but good £20
2 exhaust coupler rubbers £10 pair (SOLD)
Bypass hose not genuine Suzuki new £10 (SOLD)
3 top radiator hoses genuine Suzuki £15 each (SOLD)
Generator rotor unchecked but looks good £20
Gear lever used £15 (SOLD)
Main stand solid but tang missing £15
Side stand needs painting £10
Photos on request
GT 750 parts sale
- PaulD738
- Posts: 3962
- Joined: Thu Sep 25, 2014 6:57 pm
- Location: Warrington Cheshire
GT 750 parts sale
Last edited by PaulD738 on Tue Feb 06, 2018 8:04 am, edited 13 times in total.
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
- PaulD738
- Posts: 3962
- Joined: Thu Sep 25, 2014 6:57 pm
- Location: Warrington Cheshire
Re: GT 750 parts sale
Engine mounts sold.
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
-
- Posts: 30
- Joined: Fri Aug 12, 2016 10:31 am
Re: GT 750 parts sale
Non-locking GT750J fuel filler cap please...I have PM'd you for contact details.
Cheers
Mike
Cheers
Mike
Re: GT 750 parts sale
Hi could you send a pic of side stand please, I have a k model side star very pitted and thin . Thanks.
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: GT 750 parts sale
Hi skywalker,skywalker wrote:Hi could you send a pic of side stand please, I have a k model side star very pitted and thin . Thanks.
Welcome to the forum. Loads of help and advice here. Can you post a few pics of your bike and a brief introduction.
Re: GT 750 parts sale
Hi again
My name's Martin live up in Aberdeen, about to restore a k model I bought from Tlm classics just taken the bike apart and finding more and more wrong with it. Engine off to Phil Jones to be redone . Frame , tank , and all the small bits blasted ready for painting, bike had been painted by tlm classics unfortunately over rust pinholes
and cracks in side panels and tank flap , rough . May need replacement tank as filled with sealer inside and needing a bit of welding , fork chrome badly rusted under headlamp brackets, rest of chrome work needs done , crack and about 20 pinholes in left outer exhaust, seat base saveable foam and cover gone plus loads more needing done. Paid good money for this bike as he said it only needed crank seals done to make it a daily runner, but I'll get there eventually, looks a lot better in pics than it actually is but I am looking forward to getting it finished and riding it. Thanks for the add.
My name's Martin live up in Aberdeen, about to restore a k model I bought from Tlm classics just taken the bike apart and finding more and more wrong with it. Engine off to Phil Jones to be redone . Frame , tank , and all the small bits blasted ready for painting, bike had been painted by tlm classics unfortunately over rust pinholes
and cracks in side panels and tank flap , rough . May need replacement tank as filled with sealer inside and needing a bit of welding , fork chrome badly rusted under headlamp brackets, rest of chrome work needs done , crack and about 20 pinholes in left outer exhaust, seat base saveable foam and cover gone plus loads more needing done. Paid good money for this bike as he said it only needed crank seals done to make it a daily runner, but I'll get there eventually, looks a lot better in pics than it actually is but I am looking forward to getting it finished and riding it. Thanks for the add.
-
- Posts: 190
- Joined: Mon Aug 05, 2013 2:58 pm
- Location: STAMFORD BRIDGE
Re: GT 750 parts sale
Hi Skywalker
Sounds like 5K needs spending on it, i am on my 5th restoration of these bikes and sometimes wonder if all the cost is worth it but the end product will put a smile om your face. Good luck.
Keith
Sounds like 5K needs spending on it, i am on my 5th restoration of these bikes and sometimes wonder if all the cost is worth it but the end product will put a smile om your face. Good luck.
Keith
KETTLE 750 J
BMW S1000XR
Harley Road King
Honda CB750 K
Lambretta 1964 ser 3
BMW S1000XR
Harley Road King
Honda CB750 K
Lambretta 1964 ser 3
- garry55
- Posts: 306
- Joined: Fri Dec 27, 2013 2:49 pm
- Location: White Rose County
Re: GT 750 parts sale
Gear lever please. You have a pm.
If you need a GSX1100S seat....................
If you need a GSX1100S seat....................
Garry.
Inside every standard Kettle is a bloody good engine crying for help...............
Inside every standard Kettle is a bloody good engine crying for help...............