Oil Pump control arm

The KettleClinic forum, it is free to become a member and free to use, we have additional information available to all members.
If you have not joined yet, do it now.

Please note the email for the signup should arrive within 15 minutes, if not, please check any spam or junk folders, if still not arrived please contact the forum
bod750
Posts: 239
Joined: Mon Feb 01, 2010 1:08 pm
Location: Isle of Sheppey, Kent
Contact:

Oil Pump control arm

Postby bod750 » Mon May 21, 2018 1:18 pm

Hi, has anyone got a pic showing control arm connection to carb.
Manual is not a lot of help, any pics I look at the clutch cable
is obscuring it.

I have the spring, a plastic collet thingy and 2 nuts, one is brass
so highly unlikely it's original, so really checking to see if anything missing.

User avatar
Roger Ackery
Posts: 3279
Joined: Wed Jul 20, 2011 3:40 am
Location: Sydney NSW Australia

Re: Oil Pump control arm

Postby Roger Ackery » Mon May 21, 2018 2:08 pm

I've fitted a washer at each end of the spring on mine,you have all the correct parts, the plastic olive goes inside the brass swivel of the throttle arm,there is a Video on You Tube by Baz Wilkes on oil pump set up that shows the arm in operation,Baz can send you the link :idea:
Hope this helps ;)
Roger
Cheers.
Roger
GT750A.

bod750
Posts: 239
Joined: Mon Feb 01, 2010 1:08 pm
Location: Isle of Sheppey, Kent
Contact:

Re: Oil Pump control arm

Postby bod750 » Mon May 21, 2018 5:49 pm

Thanks Roger, I will a look

Steve

User avatar
BAZ
Posts: 3215
Joined: Thu Jun 18, 2009 7:35 pm
Location: Dudley west midlands
Contact:

Re: Oil Pump control arm

Postby BAZ » Mon May 21, 2018 8:02 pm

Hope this helps Dude https://youtu.be/03S92_yLA5o

bod750
Posts: 239
Joined: Mon Feb 01, 2010 1:08 pm
Location: Isle of Sheppey, Kent
Contact:

Re: Oil Pump control arm

Postby bod750 » Mon May 21, 2018 11:56 pm

Thanks Baz, big help

Steve

User avatar
Dutch
Posts: 578
Joined: Thu Jul 28, 2011 8:28 pm
Location: St Helens Merseyside
Contact:

Re: Oil Pump control arm

Postby Dutch » Wed May 23, 2018 9:43 am

Hi Steve, a bit more help.

Jeff
Attachments
carb2.jpg
GT750A

bod750
Posts: 239
Joined: Mon Feb 01, 2010 1:08 pm
Location: Isle of Sheppey, Kent
Contact:

Re: Oil Pump control arm

Postby bod750 » Wed May 23, 2018 12:44 pm

Thanks,
My setup does not have the adjuster nut, just 2 ordinary nuts fitted

Steve

teazer
Posts: 466
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: Oil Pump control arm

Postby teazer » Wed May 23, 2018 7:44 pm

Dutch wrote:Hi Steve, a bit more help.

Jeff


Well that doesn't look stock either. It appears to have two of 09140-04001 but should have one of those and a simple nut 09140-04002 to act as the lock nut. Stock it does not have washers either side of the "olive". At least not according to the parts list I have.

BAz's version is also not OEM original. He uses a nyloc nut and that's what I typically use as well.

bod750
Posts: 239
Joined: Mon Feb 01, 2010 1:08 pm
Location: Isle of Sheppey, Kent
Contact:

Re: Oil Pump control arm

Postby bod750 » Thu May 24, 2018 8:50 am

That seems a sensible mod

Ta


Return to “General Discussions”

Who is online

Users browsing this forum: No registered users and 2 guests