Page 1 of 1

Oil Pump control arm

Posted: Mon May 21, 2018 1:18 pm
by bod750
Hi, has anyone got a pic showing control arm connection to carb.
Manual is not a lot of help, any pics I look at the clutch cable
is obscuring it.

I have the spring, a plastic collet thingy and 2 nuts, one is brass
so highly unlikely it's original, so really checking to see if anything missing.

Re: Oil Pump control arm

Posted: Mon May 21, 2018 2:08 pm
by Roger Ackery
I've fitted a washer at each end of the spring on mine,you have all the correct parts, the plastic olive goes inside the brass swivel of the throttle arm,there is a Video on You Tube by Baz Wilkes on oil pump set up that shows the arm in operation,Baz can send you the link :idea:
Hope this helps ;)
Roger

Re: Oil Pump control arm

Posted: Mon May 21, 2018 5:49 pm
by bod750
Thanks Roger, I will a look

Steve

Re: Oil Pump control arm

Posted: Mon May 21, 2018 8:02 pm
by BAZ
Hope this helps Dude https://youtu.be/03S92_yLA5o

Re: Oil Pump control arm

Posted: Mon May 21, 2018 11:56 pm
by bod750
Thanks Baz, big help

Steve

Re: Oil Pump control arm

Posted: Wed May 23, 2018 9:43 am
by Dutch
Hi Steve, a bit more help.

Jeff

Re: Oil Pump control arm

Posted: Wed May 23, 2018 12:44 pm
by bod750
Thanks,
My setup does not have the adjuster nut, just 2 ordinary nuts fitted

Steve

Re: Oil Pump control arm

Posted: Wed May 23, 2018 7:44 pm
by teazer
Dutch wrote:Hi Steve, a bit more help.

Jeff
Well that doesn't look stock either. It appears to have two of 09140-04001 but should have one of those and a simple nut 09140-04002 to act as the lock nut. Stock it does not have washers either side of the "olive". At least not according to the parts list I have.

BAz's version is also not OEM original. He uses a nyloc nut and that's what I typically use as well.

Re: Oil Pump control arm

Posted: Thu May 24, 2018 8:50 am
by bod750
That seems a sensible mod

Ta