Alloy front master cylinder - Which year: Which GT models

The KettleClinic forum, it is free to become a member and free to use, we have additional information available to all members.
If you have not joined yet, do it now.

Please note the email for the signup should arrive within 15 minutes, if not, please check any spam or junk folders, if still not arrived please contact the forum
drfeelgood
Posts: 13
Joined: Mon Jul 16, 2018 5:05 pm

Alloy front master cylinder - Which year: Which GT models

Postby drfeelgood » Fri Dec 28, 2018 10:56 am

Thanks for your help!
Last edited by drfeelgood on Sat Jan 05, 2019 8:51 pm, edited 1 time in total.

barney01
Posts: 2405
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Alloy front master cylinder - Which year: Which GT models

Postby barney01 » Fri Dec 28, 2018 12:02 pm

Definitely early models used alloy master cylinder the went to plastic after. If you look at the link if it is from a GT250 then up to 380 only.
https://www.partzilla.com/product/suzuk ... 4c6c7b7587
NO SMOKE .......NO POKE

Kettletimes3
Posts: 1478
Joined: Thu May 03, 2012 12:58 am
Location: Sunny Wales

Re: Alloy front master cylinder - Which year: Which GT models

Postby Kettletimes3 » Sat Dec 29, 2018 10:49 pm

They also fitted these to the 750K,
But would have been a different size.

User avatar
canaletto5
Posts: 4277
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Alloy front master cylinder - Which year: Which GT models

Postby canaletto5 » Sat Dec 29, 2018 11:35 pm

drfeelgood wrote:Happy New Year friends. Quick question. I've acquired a really good all alloy, ribbed front master cylinder reservoir from what I'm told came off a GT 250. Did other size GT's use this alloy part? What year / model was also fitted with this? Best wishes, Jules


Fitted to all J and K models with a single disc ( Except the 750 which had a larger diameter bore unit)

https://www.robinsonsfoundry.co.uk/shop ... rcylinderk

http://www.suzukicycles.org/GT-series/index.html

Kev

User avatar
Alan H
Posts: 9229
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Alloy front master cylinder - Which year: Which GT models

Postby Alan H » Sun Dec 30, 2018 8:29 am

No discs on J models Kev. K onwards.
Proof that four strokes are over complicated

User avatar
canaletto5
Posts: 4277
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Alloy front master cylinder - Which year: Which GT models

Postby canaletto5 » Sun Dec 30, 2018 9:08 am

I know mate, I was referring to the Jap domestic market GT250 J which did apparently, just covering all the bases (Honest!) :lol:

User avatar
Alan H
Posts: 9229
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Alloy front master cylinder - Which year: Which GT models

Postby Alan H » Sun Dec 30, 2018 10:06 am

The US market 550K I sold last year was made in August '72 (still technically a J then) and had one of those master cylinders, so due to the vagaries of the dating systems I will be magnon mignoon mignone, I'll let you have that one! :lol:
Proof that four strokes are over complicated

User avatar
canaletto5
Posts: 4277
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Alloy front master cylinder - Which year: Which GT models

Postby canaletto5 » Sun Dec 30, 2018 10:17 am

:lol: :lol:


Return to “General Discussions”

Who is online

Users browsing this forum: No registered users and 2 guests