Alloy front master cylinder - Which year: Which GT models
Alloy front master cylinder - Which year: Which GT models
Thanks for your help!
Last edited by drfeelgood on Sat Jan 05, 2019 8:51 pm, edited 1 time in total.
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Alloy front master cylinder - Which year: Which GT models
Definitely early models used alloy master cylinder the went to plastic after. If you look at the link if it is from a GT250 then up to 380 only.
https://www.partzilla.com/product/suzuk ... 4c6c7b7587
https://www.partzilla.com/product/suzuk ... 4c6c7b7587
NO SMOKE .......NO POKE
-
- Posts: 1620
- Joined: Thu May 03, 2012 12:58 am
- Location: Sunny Wales
Re: Alloy front master cylinder - Which year: Which GT models
They also fitted these to the 750K,
But would have been a different size.
But would have been a different size.
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Alloy front master cylinder - Which year: Which GT models
Fitted to all J and K models with a single disc ( Except the 750 which had a larger diameter bore unit)drfeelgood wrote:Happy New Year friends. Quick question. I've acquired a really good all alloy, ribbed front master cylinder reservoir from what I'm told came off a GT 250. Did other size GT's use this alloy part? What year / model was also fitted with this? Best wishes, Jules
https://www.robinsonsfoundry.co.uk/shop ... rcylinderk
http://www.suzukicycles.org/GT-series/index.html
Kev
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Alloy front master cylinder - Which year: Which GT models
No discs on J models Kev. K onwards.
Proof that four strokes are over complicated
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Alloy front master cylinder - Which year: Which GT models
I know mate, I was referring to the Jap domestic market GT250 J which did apparently, just covering all the bases (Honest!)
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Alloy front master cylinder - Which year: Which GT models
The US market 550K I sold last year was made in August '72 (still technically a J then) and had one of those master cylinders, so due to the vagaries of the dating systems I will be magnon mignoon mignone, I'll let you have that one!
Proof that four strokes are over complicated
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire