electronic ignition..

The KettleClinic forum, it is free to become a member and free to use, we have additional information available to all members.
If you have not joined yet, do it now.

Please note the email for the signup should arrive within 15 minutes, if not, please check any spam or junk folders, if still not arrived please contact the forum
Post Reply
User avatar
johnakay
Posts: 583
Joined: Wed Mar 09, 2011 7:11 pm
Location: stockton on tees

electronic ignition..

Post by johnakay »

while searching came across these.
no cutting of wires etc,just plug etc..

http://www.accent-electronic.com/ELZ2Coil.html
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership
Roger Ackery
Posts: 3693
Joined: Wed Jul 20, 2011 3:40 am
Location: Sydney NSW Australia

Re: electronic ignition..

Post by Roger Ackery »

;) John, I've been running the Accent System on my Kettle for years, never missed a beat,plug & play, not that expensive,really made a big improvement to how the bike starts & runs,
Also can recommend Motobatt battery, now over 4 years old, lead acid batteries lucky to last 2 & a bit Years :roll:
Cheers.
Roger
GT750A.
User avatar
johnakay
Posts: 583
Joined: Wed Mar 09, 2011 7:11 pm
Location: stockton on tees

Re: electronic ignition..

Post by johnakay »

they're working on a t500 at the mo.
wrote and ask them and this their reply...(I've deleted the email address)

Hello John,
we are currently designing the prototype.
There are some changes to the housing necessary. If you would like more
information, please contact Alain Guinot, who can tell you everything
about the mechanics. We only do the electronics here.
Alain will also write the conversion and assembly instructions

The cost for a kit will be around 200,00 EURO (about £170)


rgd uwe
If I wanted to make a life-long career out of
working with the mentally retarded I would
have opened a Harley Davidson Dealership
Post Reply