hi,
does any one know of anywhere that the rubber grommets for the trip re set spindle can be purchased from, thanks
speedo re setting grommets
- Gary66
- Posts: 710
- Joined: Sun Jan 05, 2014 10:53 am
Re: speedo re setting grommets
Just glue a tyre valve cap on there, job done
- Waterbuffalo
- Posts: 1090
- Joined: Sat Nov 12, 2011 1:01 am
- Location: Mostly Barbados, often Florida and ocassionally western Canada; trust me,I get around.
- Contact:
Re: speedo re setting grommets
You cannot buy that part, it was never available. I've made them for the 250, 380, 500 and 550 white bodied speedos as well as the later metal ones like yours, all built from scratch. However I need to have the speedo in hand to build the boot onto it. The angulation of the gauge body to the reset shaft plus creating a perfect seal is critical.
Two strokes, its just that simple.
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: speedo re setting grommets
And the GT750 clocks that Allan did for my GT550 look superb now they are out of the bubble wrap.
Thanks again Allan, I'll get warm in a day or three!
Thanks again Allan, I'll get warm in a day or three!
Proof that four strokes are over complicated
- Waterbuffalo
- Posts: 1090
- Joined: Sat Nov 12, 2011 1:01 am
- Location: Mostly Barbados, often Florida and ocassionally western Canada; trust me,I get around.
- Contact:
Re: speedo re setting grommets
Its always a pleasure to have you out my way Mr Alan H
Two strokes, its just that simple.
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: speedo re setting grommets
Big pleasure to be there in 30 odd degrees too mate, so the feeling is mutual.
Hope to take you up on the Miami invite one day too, but we'll not mention that to anyone in case they get jealous.
Hope to take you up on the Miami invite one day too, but we'll not mention that to anyone in case they get jealous.
Proof that four strokes are over complicated