The J and K were fitted with a headlight with a bulb and not a sealed beam.Part number 35121-31640KETTLE BOY wrote:Hi steve...This might be of use to you?... You can print off any of them, or keep as Refferance pictures..as scanned in hi resolution, so won't come out geaney...
http://www.kettleclinic.co.uk/kcforum/v ... =12&t=3122
Gt750j project
-
- Posts: 1620
- Joined: Thu May 03, 2012 12:58 am
- Location: Sunny Wales
Re: Gt750j project
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
Thanks for that. I see which one I use later
Some pictures of my original seat.
I cut out some rust and welded in new plate
Original seat pad new cover
Steve
Some pictures of my original seat.
I cut out some rust and welded in new plate
Original seat pad new cover
Steve
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Gt750j project
Very nice indeed
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
Thanks kev not done one before but I like to have a go. If I cock it up it only cost me time
Steve
Steve
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Gt750j project
That's my philes filoso pheelo thinking !
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
Hi all just fitting water pipe the one by the starter motor. Dose it have a o ring. Or a copper washer
Its one of the first six mouth 750j. Not sure
Thanks Steve
Its one of the first six mouth 750j. Not sure
Thanks Steve
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Gt750j project
My first 550 had frame number 10595 (back in August '72) and I'm certain it had a round headlamp. Full size 7" unit that I binned a few days on and fitted a Cibié.
Proof that four strokes are over complicated
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
Bike had K. N filters on when I got it
Steve
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
About to start my bike had it turning on the starter
And spark at plugs.
But to day was going to fit carbs but when I turned it over it sparked at positive side of battery. Any idea
Before I pull it all apart. Thanks
Steve
And spark at plugs.
But to day was going to fit carbs but when I turned it over it sparked at positive side of battery. Any idea
Before I pull it all apart. Thanks
Steve
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Gt750j project
Loose connection or knackered wire/terminal.
Also it will be an absolute git to start without carbs.
Also it will be an absolute git to start without carbs.
Proof that four strokes are over complicated