Page 6 of 7

Re: Sky's restoration begins...

Posted: Tue Oct 01, 2019 7:12 am
by Skyguyz
PaulD738 wrote: Nowt to do with the bike though it’s an age thing :roll: ask Alan H
Hummm, Not sure but if Alan H is here chime in.

PS: I did buy another Kettle a couple weeks ago. Gotta be sumthin about two strokes.

PS *My Kawasaki triple H2 Resto-mod:

https://www.youtube.com/watch?v=Ut07KdZLh0E

Re: Sky's restoration begins...

Posted: Tue Oct 01, 2019 8:31 am
by Alan H
PaulD738 wrote:Very very nice Sky, I’m dribbling as we speak :P
Nowt to do with the bike though it’s an age thing :roll: ask Alan H
I expect so Paul - when I get to your age........

The "Baz effect."

Posted: Thu Oct 03, 2019 9:11 am
by Skyguyz
Oh, and then there are these fresh from Baz!



Image

Image

(*I did install the anti-surge jets after pix taken.)

Re: Sky's restoration begins...

Posted: Thu Oct 03, 2019 10:03 am
by zapo
Skyguyz wrote:
PaulD738 wrote: Nowt to do with the bike though it’s an age thing :roll: ask Alan H
Hummm, Not sure but if Alan H is here chime in.

PS: I did buy another Kettle a couple weeks ago. Gotta be sumthin about two strokes.

PS *My Kawasaki triple H2 Resto-mod:

https://www.youtube.com/watch?v=Ut07KdZLh0E
Stunning H2 :mrgreen:

Re: Sky's restoration begins...

Posted: Thu Oct 03, 2019 10:18 am
by Alan H
Skyguyz wrote:
PaulD738 wrote: Nowt to do with the bike though it’s an age thing :roll: ask Alan H
Hummm, Not sure but if Alan H is here chime in.
Errr, ding dong? :roll:
Anyone with dribbling problems should use a large clamp on their foreskin. That should do the trick, I would imagine. Don't have those issues meself, so maybe it's just a Cheshire (Warrington) thing? :shock:

The gods of unknown logic.....

Posted: Sat Oct 05, 2019 2:17 am
by Skyguyz
So I finally got my cylinders and head back from the machine shop. All new Wiesco pistons going in fine so far....Uh, the last wrist pin seems a little long and the C clip grove is not showing...Hummm. The pin is pushed far enough in as to be firmly against the other C clip...Hummm. So I measure the other wrist pin and kawabunga! One of the wrist pins is almost about 1 mm longer and will not work. So why the longish pin???

It measures out at 57.90mm. The other ones are at 57 mm +- a couple thou or two. So I ordered a new OEM wrist pin and will have to wait once again to finish the engine.

We will see.

At least some progress is made in other areas. The master brake cylinder was completely rebuilt with all new innards and a paint job with a new sticker. Lots done on the radiator also. The last "Biggie" thing is a refurb of the gauge cluster. The gauges worked fine when I got the bike and the clocks were not faded. So I'm opting to do a cosmetic refresh only. The caps were all re-chromed and I have a lot of new screws and bits. Next week maybe. I decided not to include a OEM fan system as Baz pointed out that the things never turn on no matter how hot it gets.


Cheers,

Sky


Image

Image

Re: Sky's restoration begins...

Posted: Sat Oct 05, 2019 9:56 am
by wardy
Skyguyz wrote:
PaulD738 wrote: Nowt to do with the bike though it’s an age thing :roll: ask Alan H
Hummm, Not sure but if Alan H is here chime in.

PS: I did buy another Kettle a couple weeks ago. Gotta be sumthin about two strokes.

PS *My Kawasaki triple H2 Resto-mod:

https://www.youtube.com/watch?v=Ut07KdZLh0E
Have just watched the H2 clip and must say , the bike is stunning!
Well done mate;

Re: Sky's restoration begins...

Posted: Sun Oct 06, 2019 8:33 am
by Skyguyz
wardy[/quote]
Have just watched the H2 clip and must say , the bike is stunning!
Well done mate;[/quote]


Thanks. that build was not easy as it seems but the results were very good. Thanks for the kind words.

Sky

CYLINDER DONE...

Posted: Thu Oct 10, 2019 3:52 am
by Skyguyz
The great debacle over the pistons, cylinder, etc seemed to last forever. The end result is using the original jugs and head with the Wiseco pistons.
It went together smoothly and the machinist did some fantastic work! Engine is basically ready to go back into the frame. I have the smaller motorcycle lift enhanced with proper board to lower the engine in place. Going to use 3 guys to do the lifting. Soon, very soon.

Sky


Image

Image

Image

Re: Sky's restoration begins...

Posted: Thu Oct 10, 2019 10:42 am
by Optedout
Looks fantastic Sky! Always fascinating to see that motion too.