Early GT550 front wiring harness going spare

Post Reply
Gr8uncleal
Posts: 126
Joined: Mon Jan 15, 2018 7:17 pm

Early GT550 front wiring harness going spare

Post by Gr8uncleal »

I seem to have acquired a spare front wiring harness/loom for an early GT550 - definitely fits a 'J' and probably a 'K' as well. My 1973 parts manual lists it as part number 36610-34000.

This is the one that connects to the rear harness with a 9 wire block connector (although only 8 are used) plus 4 individual wires - 2 red, 1 orange and 1 black and white. My own 550J is fitted with an identical harness.

Photos are attached, but I should point out that the transparent covers over the single and double bullet connectors are very brittle, as is the main black sleeve that the wires travel through. If I was going to use it, I would replace all of the bullet connector covers and the black sleeve. Also, one of the block connectors has a chip out of it, although it should still function ok.

I shall list it on a well known auction site tomorrow, but if anyone wants to jump in before then, I'm asking £40, to inc p+p.
GT550 front loom 4.jpg
GT550 front loom 3.jpg
GT550 front loom 2.jpg
GT550 front loom 1.jpg
Post Reply