Hello all,
Im looking for a GT750 front master cylinder, for a twin disk set up. You can buy patten ones on eBay but you have to wire a new brake light switch in, is there a kit for that?
Cheers, Tom
GT750 Master Cylinder
- TGladders
- Posts: 47
- Joined: Sun Feb 16, 2020 6:28 pm
- Location: Royal Leamington Spa
GT750 Master Cylinder
1974 GT550L
1976 PC50
2017 Ducati SSS
1976 PC50
2017 Ducati SSS
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: GT750 Master Cylinder
What's wrong with your old one?
- TGladders
- Posts: 47
- Joined: Sun Feb 16, 2020 6:28 pm
- Location: Royal Leamington Spa
Re: GT750 Master Cylinder
Its not for a twin disk set up, a dual disk master cylinder should have a D cast into it
1974 GT550L
1976 PC50
2017 Ducati SSS
1976 PC50
2017 Ducati SSS
- Alan H
- Posts: 12116
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: GT750 Master Cylinder
The same switch fits both.
Plus the D master cylinder makes a single disk work better - or fit one from a GS1000 or Bandit 1200 which are better still as they have bigger pistons.
Plus the D master cylinder makes a single disk work better - or fit one from a GS1000 or Bandit 1200 which are better still as they have bigger pistons.
Proof that four strokes are over complicated
- TGladders
- Posts: 47
- Joined: Sun Feb 16, 2020 6:28 pm
- Location: Royal Leamington Spa
Re: GT750 Master Cylinder
Cheers, Al, I'm converting the front of the 550 to twin disk so I need the correct larger master cylinder
I don't want the non period look of the bandit m/c, I'll look at the gs one
I don't want the non period look of the bandit m/c, I'll look at the gs one
1974 GT550L
1976 PC50
2017 Ducati SSS
1976 PC50
2017 Ducati SSS
- Alan H
- Posts: 12116
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: GT750 Master Cylinder
There's one on the hippo + calipers and the brakes are just dandy!
Bandit 1200 m/c on the 550A + gs1000 calipers and gs550 wheels (3 discs) stops just fine!
GS 550 swing arm fits without mods using same swing arm pivot bolt. Anoraks go spare!!!
Bandit 1200 m/c on the 550A + gs1000 calipers and gs550 wheels (3 discs) stops just fine!
GS 550 swing arm fits without mods using same swing arm pivot bolt. Anoraks go spare!!!
Proof that four strokes are over complicated
- TGladders
- Posts: 47
- Joined: Sun Feb 16, 2020 6:28 pm
- Location: Royal Leamington Spa