Still have the issue with my clutch.
I took the triangular plate with the 3 balls out to discover them mounted without any kind of grease.
Do they get their lubrication from the transmission oil or do I need to grease my balls?
And if so, what is the best grease for this?
Grease my balls or not?
- Kijmpe
- Posts: 52
- Joined: Sat Dec 18, 2021 12:42 pm
- Location: Den Helder, Holland
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Grease my balls or not?
Copper grease is best in my view
-
- Posts: 1035
- Joined: Mon Mar 07, 2011 8:10 pm
- Location: Chicago
Re: Grease my balls or not?
water based lube is always best...
Oh you mean for the clutch lifter, any bearing grease is fine. I haven't tried copper based that Mr C. recommended.
Oh you mean for the clutch lifter, any bearing grease is fine. I haven't tried copper based that Mr C. recommended.
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Grease my balls or not?
Copper is good because it doesn't harden (ooh-er Missus) and is anti-sieze
- Kijmpe
- Posts: 52
- Joined: Sat Dec 18, 2021 12:42 pm
- Location: Den Helder, Holland
Re: Grease my balls or not?
In the end, I greased the balls with MOS2 grease, but that didn't really charge anything.
Then I decided (against all advise) to grease the cable and that was the trick!
Then I decided (against all advise) to grease the cable and that was the trick!