Hi everyone,
I am about to bolt up the cases on my 380 but which half do you put the Threebond on before bolting up. Do I fit the crank and gear shafts,seals etc in the bottom half then coat the bottom half with the sealant working around the seals,bushes etc or do I coat the top half with the sealant and drop the top half onto the bottom.
It's just I don't want to block any oil passages in the lower half with sealant.q
CRANK CASES
-
Ethnography
- Posts: 1
- Joined: Tue Sep 12, 2023 2:41 pm
CRANK CASES
Last edited by Ethnography on Sat Apr 27, 2024 6:19 am, edited 1 time in total.
-
Scotch750
- Posts: 1187
- Joined: Thu Sep 30, 2010 1:58 pm
- Location: Walsall, West Mids.Black Country.
Re: CRANK CASES
Wuh,Ethnography wrote: ↑Tue Sep 12, 2023 2:50 pm Hi everyone,
I am about to bolt up the cases on my 380 but which half do you put the Threebond on before bolting up. Do I fit the crank and gear shafts,seals etc in the bottom half then coat the bottom half with the sealant working around the seals,bushes etc or do I coat the top half with the sealant and drop the top half onto the bottom.
It's just I don't want to block any oil passages in the lower half with sealant.
Well, yav opened up a right can o' werms ere ay ya ?
Who am ya ?, where ya from ?. Obviously got a 380
How did ya find us ?
An introduction is always nice before asking, I want this and I want that !
Otherwise, u get anoraks like me gooin' on !!
I am avin a goo but in a nice way........not like them other folks
Who the f....ks Scotch !!
-
Alan H
- Posts: 12118
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: CRANK CASES
- peepwall.gif (4.04 KiB) Viewed 668 times
Proof that four strokes are over complicated
-
Wheezyone
- Posts: 1
- Joined: Fri Sep 06, 2019 12:46 pm
Re: CRANK CASES
Two very helpful answers...
-
canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: CRANK CASES
Coat the bottom half and fit any seals or blanking plugs in the bottom half as well. You won't affect any oil passages. Kev
-
Alan H
- Posts: 12118
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: CRANK CASES
But he hasn't been back since the first post anyway.
Is it so much trouble to say 'hello' before asking questions - or making comments?
Proof that four strokes are over complicated
-
PaulD738
- Posts: 3963
- Joined: Thu Sep 25, 2014 6:57 pm
- Location: Warrington Cheshire
Re: CRANK CASES
Hello
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
-
Scotch750
- Posts: 1187
- Joined: Thu Sep 30, 2010 1:58 pm
- Location: Walsall, West Mids.Black Country.
Re: CRANK CASES
Wuh,
Well done Al.
Why can't people say Hello I'm so and so. Ive got 2 GT750's etc. I live in the Midlands (where you've pin pointed help) !
I've just come across your site and wondered can anyone help me please
Not asking for inside leg measurements !!