Hmm. There is a dark blue wire that has an in line connection to the neutral switch, and a light blue wire that has an in line connection to the indicator relay. Check they are the right way around.quark77 wrote:new motoblatt , just fitted a cheap two pin flasher , rt side still works and on left they still don t work but the neutral light and headlamp slowly flash !!
indicators won t work on left side
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: indicators won t work on left side
- Alan H
- Posts: 12120
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: indicators won t work on left side
Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more.
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more.
Proof that four strokes are over complicated
-
- Posts: 1620
- Joined: Thu May 03, 2012 12:58 am
- Location: Sunny Wales
Re: indicators won t work on left side
if I switch connections from right to left , bulbs on left then work perfectly but fault moves to rightAlan H wrote:Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more.
-
- Posts: 409
- Joined: Wed Sep 13, 2017 7:26 pm
- Location: knottingley west yorks
Re: indicators won t work on left side
might sound stupid I had same problem on a gt250 tried everything on closer inspection previous owner had fitted new indicator units that had 6 volt bulbs in put new 12 volts in new flasher unit off she went flashing like an old man in a dirty raincoat colin
- Alan H
- Posts: 12120
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: indicators won t work on left side
You got the same problem on your bike?Kettletimes3 wrote:if I switch connections from right to left , bulbs on left then work perfectly but fault moves to rightAlan H wrote:Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more.
led bulb in the dash panel for repeater? That would make 3 bulbs 1 side and 2 bulbs t'other in effect.
Or summat else entirely.............
Proof that four strokes are over complicated
-
- Posts: 495
- Joined: Tue Sep 26, 2017 10:27 pm
Re: indicators won t work on left side
cheers for the input guys , taken on board and will make further checks tomorrow !
-
- Posts: 1620
- Joined: Thu May 03, 2012 12:58 am
- Location: Sunny Wales
Re: indicators won t work on left side
All my Bulbs are in the garden,It's a bit to cold for them to show.Alan H wrote:You got the same problem on your bike?Kettletimes3 wrote:if I switch connections from right to left , bulbs on left then work perfectly but fault moves to rightAlan H wrote:Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more.
led bulb in the dash panel for repeater? That would make 3 bulbs 1 side and 2 bulbs t'other in effect.
Or summat else entirely.............
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: indicators won t work on left side
This is at the end of the loom near the relay, not in the headlampcanaletto5 wrote:Hmm. There is a dark blue wire that has an in line connection to the neutral switch, and a light blue wire that has an in line connection to the indicator relay. Check they are the right way around.quark77 wrote:new motoblatt , just fitted a cheap two pin flasher , rt side still works and on left they still don t work but the neutral light and headlamp slowly flash !!
-
- Posts: 495
- Joined: Tue Sep 26, 2017 10:27 pm
Re: indicators won t work on left side
checked that all as it should be , waiting for switch and the moment of truth !!
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: indicators won t work on left side
It is possible that you have the indicator and neutral bulb holders swapped about in your clock unit. Just check. The neutral bulb holder has dark blue and orange wires. the indicator bulb holder has a light green and a black wire.quark77 wrote:new motoblatt , just fitted a cheap two pin flasher , rt side still works and on left they still don t work but the neutral light and headlamp slowly flash !!