Hi Gents,
Any body got any recommendations regarding tank sealers. What have you used? Was it any good?
Has anyone ever used this product. RUSTBUSTER SLOSH FUEL TANK SEALER KIT ETHANOL RESISTANT SEALS UP TO 10 GALLON https://rover.ebay.com/rover/0/0/0?mpre ... 2367184773
Tank sealer.
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Tank sealer.
I have seen posts on facebook that rate this guy. Never used any of the products myself
http://www.tankcareproducts.co.uk/
http://www.tankcareproducts.co.uk/
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: Tank sealer.
Thanks Kev,canaletto5 wrote:I have seen posts on facebook that rate this guy. Never used any of the products myself
http://www.tankcareproducts.co.uk/
I’ll give him a call. Glad you’ve changed your avatar. The previous one was putting me off reading your posts.
-
- Posts: 117
- Joined: Tue May 31, 2011 1:01 pm
- Location: Sunny Norfolk
Re: Tank sealer.
Don't do it, nice clean steel is much less trouble. Had to get extreme with my S2 tank because it had a bloody liner in it.
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Tank sealer.
I've heard it's because ethanol breaks down the liner. New stuff like Slosh and Sureseal claim to be ethanol proof. No direct knowledge myself. Kev
- Tonto
- Posts: 533
- Joined: Sun Aug 21, 2011 6:28 pm
- Location: Lincoln
Re: Tank sealer.
Martin, hi
I used "Flowliner Armour Coat" on my Z900 tank approx 4 yrs ago: went on easy and set like poured glass: so far no signs of any degredation.
Only downside was that it bled thru a tiny pin hole and caused a slight imperfection in the then perfect paint - bugger: but was only about 10mm round, and has given the tank a few more years service.
Cheers Tim
I used "Flowliner Armour Coat" on my Z900 tank approx 4 yrs ago: went on easy and set like poured glass: so far no signs of any degredation.
Only downside was that it bled thru a tiny pin hole and caused a slight imperfection in the then perfect paint - bugger: but was only about 10mm round, and has given the tank a few more years service.
Cheers Tim
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: Tank sealer.
Hi Tim,Tonto wrote:Martin, hi
I used "Flowliner Armour Coat" on my Z900 tank approx 4 yrs ago: went on easy and set like poured glass: so far no signs of any degredation.
Only downside was that it bled thru a tiny pin hole and caused a slight imperfection in the then perfect paint - bugger: but was only about 10mm round, and has given the tank a few more years service.
Cheers Tim
This is for the Z1300 tank. It was slightly rusty but I treated it with oxalic acid and then rinsed it out. As per usual the flash rust set in so I treated with a bit of petrol and two stoke oil to keep it at bay. The tank then went for painting and its been sat under a blanket in the conservatory for the last few months but the rust has returned. Unfortunately, a bit heavier than when I first treated it.
The reason for sealing the tank is mainly to stop the rust getting into my refurbished carbs. I was thinking of cleaning again with oxalic acid or treating with POR 15, "Metal Prep" which etches the metal and leaves a zinc phosphate coating on the inside. Not sure if the zinc phosphate will wash out once petrol goes in the tank. Either way I don't want to damage the paintwork on the tank.
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: Tank sealer.
Hi Gents,
Thanks for the recommendations. I'll have to carefully think which way to go with this.
Thanks for the recommendations. I'll have to carefully think which way to go with this.
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: Tank sealer.
Wow, who's going to weld that back together.emptyoiltank wrote:Don't do it, nice clean steel is much less trouble. Had to get extreme with my S2 tank because it had a bloody liner in it.