Hi, has anyone got a pic showing control arm connection to carb.
Manual is not a lot of help, any pics I look at the clutch cable
is obscuring it.
I have the spring, a plastic collet thingy and 2 nuts, one is brass
so highly unlikely it's original, so really checking to see if anything missing.
Oil Pump control arm
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
-
- Posts: 3693
- Joined: Wed Jul 20, 2011 3:40 am
- Location: Sydney NSW Australia
Re: Oil Pump control arm
I've fitted a washer at each end of the spring on mine,you have all the correct parts, the plastic olive goes inside the brass swivel of the throttle arm,there is a Video on You Tube by Baz Wilkes on oil pump set up that shows the arm in operation,Baz can send you the link
Hope this helps
Roger
Hope this helps
Roger
Cheers.
Roger
GT750A.
Roger
GT750A.
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
Re: Oil Pump control arm
Thanks Roger, I will a look
Steve
Steve
- BAZ
- Posts: 3599
- Joined: Thu Jun 18, 2009 7:35 pm
- Location: Dudley west midlands
- Contact:
Re: Oil Pump control arm
Hope this helps Dude https://youtu.be/03S92_yLA5o
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
Re: Oil Pump control arm
Thanks Baz, big help
Steve
Steve
- Dutch
- Posts: 756
- Joined: Thu Jul 28, 2011 8:28 pm
- Location: St Helens Merseyside
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
Re: Oil Pump control arm
Thanks,
My setup does not have the adjuster nut, just 2 ordinary nuts fitted
Steve
My setup does not have the adjuster nut, just 2 ordinary nuts fitted
Steve
-
- Posts: 1035
- Joined: Mon Mar 07, 2011 8:10 pm
- Location: Chicago
Re: Oil Pump control arm
Well that doesn't look stock either. It appears to have two of 09140-04001 but should have one of those and a simple nut 09140-04002 to act as the lock nut. Stock it does not have washers either side of the "olive". At least not according to the parts list I have.Dutch wrote:Hi Steve, a bit more help.
Jeff
BAz's version is also not OEM original. He uses a nyloc nut and that's what I typically use as well.
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
Re: Oil Pump control arm
That seems a sensible mod
Ta
Ta