Stator plate

Post your Kettle problems here and cures
Filly
Posts: 41
Joined: Wed Nov 02, 2016 3:16 pm

Stator plate

Post by Filly »

Hello everyone, is someone able to post me photos of the stator plate of the GT 380, GT 550 and GT 750? This is because I have to understand if they differ from each other in the positioning of the left and central right pins. The problem arises from a possible error in the reconstruction of the crankshaft, having my GT 750 the positions of the inverted pins between them. Thank you all. :(
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Stator plate

Post by Alan H »

What pins are you referring to?
Proof that four strokes are over complicated
Filly
Posts: 41
Joined: Wed Nov 02, 2016 3:16 pm

Re: Stator plate

Post by Filly »

Unfortunately I do not know English and I have to translate with google, so for pin I wanted to understand the point assy. Sorry for the confusion. Thank you
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Stator plate

Post by canaletto5 »

There you go Filly. GT750B points assembly
IMG_3075.JPG
Kev
teazer
Posts: 1035
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: Stator plate

Post by teazer »

I think that Filly had his crank rebuilt and suspects that it may have been assembled with incorrect phasing so that the firing order is now wrong.

750 is Left-Center-Right going anti clockwise.
Filly
Posts: 41
Joined: Wed Nov 02, 2016 3:16 pm

Re: Stator plate

Post by Filly »

Yes, this is actually how it went. The technician who rebuilt the mast has inverted the flywheels of the shaft by 120 degrees, so now the ignition order is reversed. The bike goes equally well but on the platen plate the openings of the platinum dots are turned. Soon I will put photos of the paitto statore. Greetings to all.
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Stator plate

Post by canaletto5 »

Offer to buy him a scribe for the next job :o
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Stator plate

Post by Alan H »

Disconnect the three wires from points to coils and reconnect them so the correct plug fires - or remove the points plate and rotate it 120ø.
Proof that four strokes are over complicated
User avatar
BAZ
Posts: 3599
Joined: Thu Jun 18, 2009 7:35 pm
Location: Dudley west midlands
Contact:

Re: Stator plate

Post by BAZ »

Spot on Alan.
User avatar
Scotch750
Posts: 1183
Joined: Thu Sep 30, 2010 1:58 pm
Location: Walsall, West Mids.Black Country.

Re: Stator plate

Post by Scotch750 »

Wuh, ees an engineer u know !! :D
Post Reply