Hi, have been a bit quiet on the bike project for a while but starting
to get back into it again.
I am currently building a custom instrument setup, the rev counter is fine but the speedometer
is beyond repair so looking for a replacement, I don't need the whole gauge just the mechanism
so wondered if anyone has one they would consider selling.
Steve
Speedometer wanted
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
- Alan H
- Posts: 12104
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Speedometer wanted
I've a 550 one you can have if that's any good.
Proof that four strokes are over complicated
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
Re: Speedometer wanted
Hi Alan, thanks I will post some pics later with some measurements to see if its the same size.
Steve
Steve
- Alan H
- Posts: 12104
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Speedometer wanted
The complete units aren't the same size as a 750, but use the same drive on the wheel, so the guts should be compatible if you're doing a custom jobbie.
Proof that four strokes are over complicated
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Speedometer wanted
NO SMOKE .......NO POKE
- Alan H
- Posts: 12104
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Speedometer wanted
Oi, I want them!barney01 wrote:https://www.ebay.co.uk/itm/SUZUKI-GT550 ... SwaXNelJIb
Proof that four strokes are over complicated
-
- Posts: 3118
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Speedometer wanted
Haha! Sorry mateAlan H wrote:Oi, I want them!barney01 wrote:https://www.ebay.co.uk/itm/SUZUKI-GT550 ... SwaXNelJIb
NO SMOKE .......NO POKE
- Alan H
- Posts: 12104
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Speedometer wanted
Only kidding really Barney. I've got a few spares.
Proof that four strokes are over complicated
-
- Posts: 292
- Joined: Mon Feb 01, 2010 1:08 pm
- Location: Isle of Sheppey, Kent
- Contact:
Re: Speedometer wanted
Hi all, thaanks for the help, I would need the mechanism to be physically the same to work in the body I am making.
I have attached some pics of the mock up unit.
Steve
I have attached some pics of the mock up unit.
Steve