Good afternoon all.
I've a couple of broken off M6 bolts that need removing. There's nothing to get hold of so it's going to be difficult. I've got a bit of Plus Gas soaking action going on at the moment with may help, i hope. I'm a bit concerned at using extractor bits as I've sheared one before and it was devils own job to remove!
Can anyone recommend a good local vendor for Spark Erosion in the South East or London?
Thanks
Ratsville
Sheared Bolts can anyone assist please
- Ratsville
- Posts: 106
- Joined: Tue May 24, 2011 3:39 pm
- Location: Lewes
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: Sheared Bolts can anyone assist please
Do you have a mig welder? If you weld a nut to them and quench they usually undo quite easily
-
- Posts: 1620
- Joined: Thu May 03, 2012 12:58 am
- Location: Sunny Wales
Re: Sheared Bolts can anyone assist please
+1 on what rodent suggests.
-
- Posts: 128
- Joined: Tue Jun 10, 2014 5:26 pm
- Location: under bridge J22 M60
- Ratsville
- Posts: 106
- Joined: Tue May 24, 2011 3:39 pm
- Location: Lewes
Re: Sheared Bolts can anyone assist please
Thanks for suggestions. After a think and a brew I was able to drill them out without too much drama. I was expecting the worst, it just didn't happen .