GT550 noisy clutch.

Post your Kettle problems here and cures
User avatar
normski
Posts: 24
Joined: Sun Jul 26, 2020 4:37 pm
Location: Sheffield, South Yorkshire

Re: GT550 noisy clutch.

Post by normski »

normski wrote: Wed Mar 10, 2021 12:20 pm
Kettletimes3 wrote: Tue Mar 09, 2021 10:36 pm Sounds like you have a surging issue.
On The Kettle ? yes that's what i'm lead to believe. Got too many projects and not enough time.
Im waiting for some 0.8mm drills to be delivered so I can get some jets made out of 4mm brass screws. I'v a very good mate with laith :D :D.
The trouble with birthdays ... the more you have the less you have to look forward to. :( .
barney01
Posts: 3120
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: GT550 noisy clutch.

Post by barney01 »

I knew i'd read it somewhere....
viewtopic.php?t=5904
NO SMOKE .......NO POKE
teazer
Posts: 1035
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: GT550 noisy clutch.

Post by teazer »

normski wrote: Wed Mar 10, 2021 12:31 pm
normski wrote: Wed Mar 10, 2021 12:20 pm
Kettletimes3 wrote: Tue Mar 09, 2021 10:36 pm Sounds like you have a surging issue.
On The Kettle ? yes that's what i'm lead to believe. Got too many projects and not enough time.
I'm waiting for some 0.8mm drills to be delivered so I can get some jets made out of 4mm brass screws. I've a very good mate with lathe :D :D.
Nothing wrong with that, but they are cheap and available from any Mikuni dealer. Part numbers etc at http://pinkpossum.com/GT750/carb/BS40carbs.htm
User avatar
normski
Posts: 24
Joined: Sun Jul 26, 2020 4:37 pm
Location: Sheffield, South Yorkshire

Re: GT550 noisy clutch.

Post by normski »

teazer wrote: Wed Mar 10, 2021 5:54 pm
normski wrote: Wed Mar 10, 2021 12:31 pm
normski wrote: Wed Mar 10, 2021 12:20 pm

On The Kettle ? yes that's what i'm lead to believe. Got too many projects and not enough time.
I'm waiting for some 0.8mm drills to be delivered so I can get some jets made out of 4mm brass screws. I've a very good mate with lathe :D :D.
Nothing wrong with that, but they are cheap and available from any Mikuni dealer. Part numbers etc at http://pinkpossum.com/GT750/carb/BS40carbs.htm
May be , I've purchased from the same Mikuni man before and I recommend him. But some people just like the challenge and why pay for something when you or your MATE can make it. :!: And besides .... your comment is immaterial and doesn't address the problem. :?
But thanks all the same :roll:
The trouble with birthdays ... the more you have the less you have to look forward to. :( .
User avatar
normski
Posts: 24
Joined: Sun Jul 26, 2020 4:37 pm
Location: Sheffield, South Yorkshire

Re: GT550 noisy clutch.

Post by normski »

normski wrote: Fri Mar 12, 2021 7:22 pm
teazer wrote: Wed Mar 10, 2021 5:54 pm
normski wrote: Wed Mar 10, 2021 12:31 pm

I'm waiting for some 0.8mm drills to be delivered so I can get some jets made out of 4mm brass screws. I've a very good mate with lathe :D :D.
Nothing wrong with that, but they are cheap and available from any Mikuni dealer. Part numbers etc at http://pinkpossum.com/GT750/carb/BS40carbs.htm
May be so, I've purchased from the same Mikuni man before and I recommend him. But some people just like the challenge and why pay for something when you or your MATE can make it. :!: And besides .... your comment is immaterial and doesn't address the problem. :?
But thanks all the same :roll:
Ps:The only ones I've see is from the Good Old US of A ... £8.00 jet £14.00 the postage!!!! and like I said I've a very good Mate with a very good laithe ...Have you. :?:
"
The trouble with birthdays ... the more you have the less you have to look forward to. :( .
Post Reply