Hi, as the title suggests, my ignition has decided to stay permanently 'on' on my 75 Kettle. This means the neutral light is always on and I can start the bike without putting the key in!?
I'm assuming it's a problem with the ignition switch. If it is, how do I take the switch out?
If it isn't, has anybody come across this before... any ideas welcome.
Thanks for any help.
Ignition permanently on!?
-
- Posts: 2
- Joined: Sun Dec 31, 2017 10:44 am
Re: Ignition permanently on!?
Sorted! Worked out how to get the ignition switch out, found a break in the cable with fused and corroded wires.
- astrax
- Posts: 1182
- Joined: Sun May 02, 2010 12:22 am
- Location: Hampshire
- Contact:
Re: Ignition permanently on!?
Excellent, hopefully will be an easy fix, just need to make sure can get the correct gauge wire and replace
Have seen some quite cheap pattern ignition switches, but some have had wires a bit too thin, so if need to replace the switch, double check it is ok to use.
Welcome to the forum
Thanks
Ian
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire