Nearly job done

keithbailey · Post by **keithbailey** » Tue Sep 22, 2020 7:25 pm

550 looking good Baz just need a decent Rev counter clock had a offer of 7.5k so may have to go. 750 just needs pipes that are coming next week

rodent · Post by **rodent** » Tue Sep 22, 2020 8:20 pm

Nice

BAZ · Post by **BAZ** » Tue Sep 22, 2020 9:06 pm

fab keep it...

Alan H · Post by **Alan H** » Wed Sep 23, 2020 6:00 am

What clock do you need?

keithbailey · Post by **keithbailey** » Wed Sep 23, 2020 9:36 am

Hi Alan
Its the rev counter clock for the J Model as on mine the needle is bouncing about.
Thanks
Keith

Alan H · Post by **Alan H** » Wed Sep 23, 2020 12:04 pm

I'll have a look for a non bouncy one when I get home.

keithbailey · Post by **keithbailey** » Wed Sep 23, 2020 1:17 pm

That would be very kind of you, a true Yorkshire man.
Keith

Alan H · Post by **Alan H** » Thu Sep 24, 2020 12:37 am

I definitely have one or two, but they are in the black box under the two blue crates and they are blocked in at the mo'
It was peeing down ouside when I took this, so I didn't want to get the bikes out in the wet. I'll try harder tomorrow.
Here's a 'couple' of pics to show what I mean...... There's another 550 in there too!!

Alan H · Post by **Alan H** » Thu Sep 24, 2020 12:38 am

Or there's this of course.......

suzukigary · Post by **suzukigary** » Thu Sep 24, 2020 9:15 am

Nice.

Kettle Clinic

Kettle Clinic

Nearly job done

Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done

Re: Nearly job done