Probably well known to you old sweats but a new one on me.
Trying to get the taper bearing races out of the GS1000 frame with no way of getting at them to drive them out.
Looked for answers on t'internet
Welded a bolt across the race faces
Tapped out with a cold chisel.
Simples !
A boobtube hack that worked !
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: A boobtube hack that worked !
If you weld a bead around the bearing it will shrink it and it'll lift out easily
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: A boobtube hack that worked !
Well, I'm not putting them back in to test the method