Page 2 of 4

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 4:24 pm
by canaletto5
quark77 wrote:new motoblatt , just fitted a cheap two pin flasher , rt side still works and on left they still don t work but the neutral light and headlamp slowly flash !!
Hmm. There is a dark blue wire that has an in line connection to the neutral switch, and a light blue wire that has an in line connection to the indicator relay. Check they are the right way around.

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 4:33 pm
by Alan H
Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more. :roll:

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 4:59 pm
by Kettletimes3
Alan H wrote:Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more. :roll:
if I switch connections from right to left , bulbs on left then work perfectly but fault moves to right

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 5:39 pm
by senicoli
might sound stupid I had same problem on a gt250 tried everything on closer inspection previous owner had fitted new indicator units that had 6 volt bulbs in put new 12 volts in new flasher unit off she went flashing like an old man in a dirty raincoat ;) :) colin

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 6:35 pm
by Alan H
Kettletimes3 wrote:
Alan H wrote:Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more. :roll:
if I switch connections from right to left , bulbs on left then work perfectly but fault moves to right
You got the same problem on your bike? :lol:

led bulb in the dash panel for repeater? That would make 3 bulbs 1 side and 2 bulbs t'other in effect.
Or summat else entirely.............

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 8:17 pm
by quark77
cheers for the input guys , taken on board and will make further checks tomorrow !

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 10:29 pm
by Kettletimes3
Alan H wrote:
Kettletimes3 wrote:
Alan H wrote:Dirty connection on the bulb or old bulb. Check the bulbholder/bulb and see if either are dirty/discoloured. What test do you get through the switch?
Hopefully it'll be traced if it was a signed for parcel/envelope. I don't think M. Mouse is used any more. :roll:
if I switch connections from right to left , bulbs on left then work perfectly but fault moves to right
You got the same problem on your bike? :lol:

led bulb in the dash panel for repeater? That would make 3 bulbs 1 side and 2 bulbs t'other in effect.
Or summat else entirely.............
All my Bulbs are in the garden,It's a bit to cold for them to show. :lol:

Re: indicators won t work on left side

Posted: Tue Feb 13, 2018 10:52 pm
by canaletto5
canaletto5 wrote:
quark77 wrote:new motoblatt , just fitted a cheap two pin flasher , rt side still works and on left they still don t work but the neutral light and headlamp slowly flash !!
Hmm. There is a dark blue wire that has an in line connection to the neutral switch, and a light blue wire that has an in line connection to the indicator relay. Check they are the right way around.
This is at the end of the loom near the relay, not in the headlamp

Re: indicators won t work on left side

Posted: Wed Feb 14, 2018 3:17 pm
by quark77
checked that all as it should be , waiting for switch and the moment of truth !!

Re: indicators won t work on left side

Posted: Wed Feb 14, 2018 10:23 pm
by canaletto5
quark77 wrote:new motoblatt , just fitted a cheap two pin flasher , rt side still works and on left they still don t work but the neutral light and headlamp slowly flash !!
It is possible that you have the indicator and neutral bulb holders swapped about in your clock unit. Just check. The neutral bulb holder has dark blue and orange wires. the indicator bulb holder has a light green and a black wire.