Suzuki T250 Ignition Coil 33410-15020

Post Reply
User avatar
Syd
Posts: 288
Joined: Tue Aug 16, 2011 11:25 pm

Suzuki T250 Ignition Coil 33410-15020

Post by Syd »

Hello - Can anyone recommend a supplier who would have a set of reproduction ignition coils for a T250 Suzuki that will fit straight onto the mounting bracket?
barney01
Posts: 2934
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Suzuki T250 Ignition Coil 33410-15020

Post by barney01 »

Syd
These are on your side of the world?
Maybe ask them the question regarding fitment?
https://m.ebay.co.uk/itm/Suzuki-GT125-G ... 07a54edd62
NO SMOKE .......NO POKE
User avatar
Syd
Posts: 288
Joined: Tue Aug 16, 2011 11:25 pm

Re: Suzuki T250 Ignition Coil 33410-15020

Post by Syd »

Thanks for that - I also saw them as well, however not that flash with red leads. I'll check to see if they can supply black leads as well, cheers
barney01
Posts: 2934
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Suzuki T250 Ignition Coil 33410-15020

Post by barney01 »

If not perhaps cover with black heatshrink?
NO SMOKE .......NO POKE
User avatar
Syd
Posts: 288
Joined: Tue Aug 16, 2011 11:25 pm

Re: Suzuki T250 Ignition Coil 33410-15020

Post by Syd »

I managed to cut back and carefully remove the plastic moulding covering the plug leads back to where the leads are soldered to the contact on each coil and fit new leads. I used Araldite to seal off the soldered contacts and leads and then used some epoxy putty to form a new moulding over the leads etc. Apart from looking like a couple of mini Egyptian Sphinxes, they should be fine.
Attachments
T250 Coils.jpeg
Last edited by Syd on Mon Jul 15, 2019 11:11 am, edited 1 time in total.
barney01
Posts: 2934
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Suzuki T250 Ignition Coil 33410-15020

Post by barney01 »

Result Syd! Cheaper than new too.. :D
NO SMOKE .......NO POKE
Post Reply