Suzuki T250 Ignition Coil 33410-15020
- Syd
- Posts: 311
- Joined: Tue Aug 16, 2011 11:25 pm
Suzuki T250 Ignition Coil 33410-15020
Hello - Can anyone recommend a supplier who would have a set of reproduction ignition coils for a T250 Suzuki that will fit straight onto the mounting bracket?
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Suzuki T250 Ignition Coil 33410-15020
Syd
These are on your side of the world?
Maybe ask them the question regarding fitment?
https://m.ebay.co.uk/itm/Suzuki-GT125-G ... 07a54edd62
These are on your side of the world?
Maybe ask them the question regarding fitment?
https://m.ebay.co.uk/itm/Suzuki-GT125-G ... 07a54edd62
NO SMOKE .......NO POKE
- Syd
- Posts: 311
- Joined: Tue Aug 16, 2011 11:25 pm
Re: Suzuki T250 Ignition Coil 33410-15020
Thanks for that - I also saw them as well, however not that flash with red leads. I'll check to see if they can supply black leads as well, cheers
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Suzuki T250 Ignition Coil 33410-15020
If not perhaps cover with black heatshrink?
NO SMOKE .......NO POKE
- Syd
- Posts: 311
- Joined: Tue Aug 16, 2011 11:25 pm
Re: Suzuki T250 Ignition Coil 33410-15020
I managed to cut back and carefully remove the plastic moulding covering the plug leads back to where the leads are soldered to the contact on each coil and fit new leads. I used Araldite to seal off the soldered contacts and leads and then used some epoxy putty to form a new moulding over the leads etc. Apart from looking like a couple of mini Egyptian Sphinxes, they should be fine.
Last edited by Syd on Mon Jul 15, 2019 11:11 am, edited 1 time in total.
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Suzuki T250 Ignition Coil 33410-15020
Result Syd! Cheaper than new too..
NO SMOKE .......NO POKE